1400 Nissan head torque settings

Here are the torque specs for the Nissan 1400 engine:

• Main bearing cap bolts: 58-65 Nm (43-48 lb-ft)
• Connecting rod cap bolts: 24-28 Nm (18-21 lb-ft)
• Cylinder head bolts: 40-45 Nm (30-33 lb-ft)
• Rocker arm shaft bolts: 20-25 Nm (15-18 lb-ft)
• Flywheel bolts: 85-95 Nm (63-70 lb-ft)

Note that these are general torque specs and may vary slightly depending on the specific year and model of the Nissan 1400 engine. It's always best to consult the factory service manual for the exact torque specs for your engine.

no BAKKIE up here, at all
is this car in S.Africa? not told location, parts and books are by location or not told VIN.
no year car told 1971-2008 (omg vast years,)
no fuel it burns told, (gas/or diesel) petrol or LNG or what>
wiki clue
we have no African forums here, mostly is North of equator covered cars.
hark?
the model in South Africa received a 1.4-liter engine (code A14) in 1980 (or 1984) and was renamed to Datsun 1400 and 1982 respectively to Nissan 1400.[1][3][5]

Question edited. Let's assume it is a Nissan?
Question moved to that category.

https://www.engine-specs.net/nissan/a14.html

https://www.google.com/search?q=nissan+1400+bakkie+engine+oil+recommendation

..

It would be advisable

Torque for what component? Are you talking cylinder heads or what?

Need the torque settings for a nissan np200 8valve silinder head

denysboltt make up your mind is it a BAKKIE or not.
and BAKKIE is not in our country
no year car,
and no exact 1400 , 1.4 engine stated it has a real name
a real nissan name.
6 classes there are back to 1968
no car stated just vague 1.4L , no country and no year told
strike 3 you are out. sorry.

The best solution you'll get from books at www.reliable-store.com

These are books containing info on repair, service, troubleshooting, parts info, assembling dissemble, removal, error/fault co des, wiring diagrams and everything on any vehicles cars, atv, trucks. forklifts, boats, excavators etc

Denysboltt.
you are on USA forum asking about African cars only.
why?> we have no BAKKIE cars of any kind here nor books on them. period.
go to Nissan buy the shop manual , there, ok./?

first you need to know what year is it and engine size in liters 2.0, 3.0,2.2 etc.and then you can get what you look for,