Push to talk..

and sometimes it came.if yes then install the setting from costumer care helpline
if not then change the sim card the problem is with that

go at- SETTINGS
then - CONNECTIONthen - PACKET DATA...... - Packet data connection
....... - and select ( when nedded )

for anny problem email me at [email protected]

1. Go to Menu.
2. Then go to Settings.
3. Go to connectivity.
4. Press Packet Data option.
5. Go to Packet Data Settings.
6. Choose a valid Access Point according to your mobile service provider.
( Before above steps ; please make sure that you have valid GPRS / EDGE settings.

Packet data (EGPRS) Enhanced general packet radio service (EGPRS), packet data, is a network service ceive data over an Internet protocol which allows mobile phones to send and re (IP)-based network. It enables wireless access to data networks such as the Internet.77 . 2005 Nokia. All rights reserved © Copyright The applications that may use packet data are MMS, browsing sessions, Push to talk, e-mail, remote SyncML, Java application downloading, and the PC dial-up. Packet > Connectivity > Settings > Menu To define how to use the service, select Packet data connection > data . to set the packet data connection to be established when an When needed Select application needs it. The connection will be closed when the application is terminated. to set the phone to automatically connect to an packet data Always online Select network when it is switched on. indicates a packet data connection. Modem settings You can connect the phone using an IR or a data cable connection to a compatible PC, and use the phone as a modem to enable packet data connectivity from the PC. > Settings > Menu To define the settings for connections from the PC, select , activate Active access point > Packet data settings > Packet data > Connectivity Alias . Select Edit active access point the access point you want to use, and select , and enter a nick name for the currently selected access point. for access point , and enter the access point name (APN) to Packet data access point Select establish a connection to an EGPRS network. You can also set the dial-up service settings (access point name) on your PC using If you have set the 121 p. PC Suite the Nokia Modem Options software. See . settings both on the PC and on your phone, the PC settings are used.

Hi keich...
To open packet data Goto
Menu>Web>Browser or Goto Address
Enter address>ok

If it gives any error
Try the following

*First contact your network operators customer care check whether internet service of your number active or not If it's already active request them to send internet settings save and activate these settings
if problem persists Restore factory settings by Menu>Settings>Restore Factory Settings>(Default Security Cide will be 12345)
Then also problem persists contact your network operators customer care ask the accesses point name(you can create a internet setting manually by Menu>Settings> Configuration Settings>Personal Con Settings>Web>you can enter home page as you wish(ie:any website id) select "use pref access pt"to no>Access pt settings>Proxy to "Disable">Bearer settings>Packet data acc pt>enter the access point what they provided

I hope this helps.....
Than you

1)GO TO
MENU>SETTINGS>CONFIGURATION SETTINGS>DEFAULT ACCESS POINT>(SELECT YOUR WORKING ACCESS POINT)
2)OPEN E BUDDY AND CONNECT THROUGH DEFAULT ACCESS POINT
AND ENJOY

try setting ur GPRS manually.
go to settings>connections>access points
then select options and new access point. give the name of your connection and the access point. (for eg. internet)
P.S go to connections>packet data
select packet data connection to WHEN AVAILABLE.
and leave the access point NONE.

contact your mobile service provider

Hi,
Here is the procedure for subscribing to packet data:
Menu--settings--connectivity--packet data--packet data settings--edit active access point--packet data access point. Once you are at this point you will be required to type in a name for your access point: Type in "Internet" and then save your settings and exit back to standby screen.
You should now be able to browse the internet.
Best wishes,
Graemevm

hello..

please try to manually configure your browser settings with this one..

GPRS/WAP Internet Settings
Connection name: SMARTGPRS
Data bearer: Packet data
Access point name: smart1
User name: leave this blank
Prompt password: No
Password: leave this blank
Authentication: Normal
Homepage: http://wap.smart.com.ph

Network type IPv4
Phone IP address: 10.102.61.46
Name servers: Automatic
Proxy server address: 10.102.61.46
Proxy port number: 8080 or 9201
(differs from one handset model to another)

Default access point: SMARTGPRS
Data bearer: Choose GPRS
Access point: internet
User name: (leave it blank)
Prompt p’word: No
Password: (leave it blank)
Authentication: Normal
Homepage: http://wap.smart.com.ph

II. MMS Settings

Connection name : SMARTMMS
Data bearer:Packet data
Access point: mms
User name: leave it blank
Prompt password: No
Password: leave it blank
Authentication: Normal
Homepage : http://10.102.61.238:8002

Network type IPv4
Phone IP address: 10.102.61.46
Name servers: Automatic
Proxy server address: 10.102.61.46
Proxy port number: 8080 or 9201
(differs from one handset model to another)

Default access point: SMARTGPRS
Data bearer: Choose GPRS
Access point: mms
User name: (leave it blank)
Prompt p’word: No
Password: (leave it blank)
Authentication: Normal
Homepage: http://10.102.61.238:8002


hope it helps..