No fm radio stations tune in. 1993 Acura Legend/ w Bose radio/cassett. AM works great. verified all antenna connections already.

The alternator is most likly the problem. If it was ok before and you had the alternator replaced the problem should be the new alternator. The above answer is if static is your problem. If you can not pick up stations there is a good chance that you have a antenna problem.

all stations, AM and FM?
is the antenna , broken? or unplugged from rear of radio?

past 90.?
that is FM. and FM must have an antenna to work
or are you saying the button fails to advance the stations.
if yes, that is a bad radio.

1. Connect the FM antenna and the AM loopantenna at the back of the unit. Rotate the AM loop for better reception.
2. Press AM/FM.
3. Tune a station by pressing TUNER+/-repeatedly until the desired station is found.Alternatively, you can press and hold thesame buttons down for about one second toactivate the automatic search function. Inthis mode the unit will automatically tunefrequencies until it finds a station.
4. Repeat step 3 to tune to another radio station.
5. Press AM/FMto select between FM and AM.Storing Radio Stations

The unit can store up to 40 radio stations (30 preset stations for FM and 10 preset stations for AM) in its memory. You can enter every single radio station yourself or the unit can store all available radio stations automatically in ascending order

Automatic Preset Programming
1. Press AM/FM to enter the AM/FM mode.
2. Press and hold AM/FM for two seconds to start automatic preset programming.
3. Radio frequencies will be browsed and radiostations stored automatically. When all the available radio stations are stored or all 40(30 preset stations for FM and 10 preset stations for AM) memory locations are full,the auto preset programming function will stop.

Manual Preset
1. Tune to a radio station (see "Manual tuning"for details).
2. Press MEMORY. While the Program Preset number is still flashing, input your desired preset number using the numeric buttons or press CH+/-, then press MEMORY to store it.

Retrieving Preset Stations
1. Press AM/FM to enter the Tuner mode.
2. Press CH +/- to search up or down for thepreset stations or directly press the numeric buttons.

AM radio is gone with the wind Cheryl,have to be home and play with antenna,remember them days,the 70's,lol.

Turn on the radio and increase the volume if you can hear a hiss through the speakers, chance is the aerial/antenna connection is not hooked up correctly. Another way to check is try tuning to an AM station if you get a signal on AM but not FM then it is The antenna. You may have to remove the radio to get at the connection.

If the Code is not working it means one of 2 things

1. Wrong Code
2. Bad Radio

contact acura or toyota , have your vin# handiy
they can give you the code and how to enter it
i assume you had a dead battery at some point?

YOU MAY HAVE A PROBLEM WITH THE ANTENNA. THERE ARE 4 ANTENNAS IN THE REAR WINDOW FOR BOTH AM AND FM SIGNALS. THERE IS AND UNIT CALLED A DIVERSITY BOX UNDER THE REAR HAT SHELF THE CONNECTS THEM ALL AND DECIDES WHAT ANTENNA IS GETTING THE BEST SIGNAL. THAT UNIT MAY BE FAULTY. BEST TO HAVE IT CHECKED BY SOMEONE WHO KNOWS THE SYSTEM OR TAKE IT TO A DEALER. MIGHT BE CHEAPER THAN BUYING A NEW AFTERMARKET RADIO.

I’m happy to help further over the phone at https://www.6ya.com/expert/anthony_dda4e0152e94f3c0

Call the XM service number, they will refresh your signals. If it was the head unit, the same problem would occur during AM/FM signal transmission

I have an 1993 Acura Legend L care with a Bose sound system. I need to find a way to remove the stereo for the serial number... any suggestions?