Question about Nikon F80 35mm SLR Camera

1 Answer

Grid lines in Nikon f80

I know it is used for compsition. where on web can i find how to use them. i am a total and own a f80.

Posted by aes peru pal on

  • aes peru pal Nov 18, 2007

    sorry for the spelling errors and omission of words. what i meant was that i am a total beginer in photography. i am very much intrigued by the grid lines in f80 i guessed that they are used for composition. but i want sources on internet which will teach me the basics of how to use them.

×

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 185 Answers

Aes peru pal,

grid lines are mostly used in copying say from a magazine article or anything that distortion will degrade, ( larger on top than on bottom ). or a tall structure that you want to look higher by distortion. this can be done with any fresnel lens,grids make it easier.

Posted on Dec 16, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Nikon F80 won't load y film automatically, it has a FEE error on the screen but i don't know what that is??


The lens you are using has the aperture ring set to something the camera cannot use. Simply turn the aperture ring to the largest number, usually a 22 or 32. Lock that ring if there is a lock and the fee should be gone.

Aug 31, 2012 | Nikon F80 35mm Film Camera

1 Answer

Problems Printing - Canon Multipass F80


sounds like there's something caught on the ink cartridge head. go to the canon ink cartridge information webs site to see if there is an answer there or in the manual that came with the printer. good luck

Apr 29, 2010 | Canon MultiPASS F80 All-In-One InkJet...

1 Answer

Canon f80 multipass New five years ago never


Are you using Windows Vista or Windows 7? If so, the driver download page at Canon does not provide drivers beyond XP. Otherwise, go back to the XP (or earlier versions) driver downlaod site and download the MultiPASS F80 Software User's Guide. That may provide the answer to your problem. Also, if you are using unpopular, proprietary software programs the driver may not recognize the commands. Good Luck!

Apr 26, 2010 | Canon MultiPASS F80 All-In-One InkJet...

1 Answer

How do empty the 'used toner tank' on the canon multipass F80 printer


Hi
A "CHECK PRINTER" message is a general error warning, only by turning on the Error Management SSW#1 will you obtain an error code number. This may or may not be a waste ink warning, it could also indicate a head tempreture or other error.
Any Authorized Canon Dealer would know how to enter the service mode on this unit and effect repairs

Jan 16, 2010 | Canon MultiPASS F80 All-In-One InkJet...

1 Answer

Canon multipass f80 error waste ink near full


ok

This works on the F30, F60, and F80.
Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Skip step (6) since there is no [OK] key on F30 printers.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Jun 20, 2009 | Canon MultiPASS F80 All-In-One InkJet...

1 Answer

Hard drive failure required rebuild of XP Home on Dell computer. XP Home updated to SP3. Canon Multiplass F80 printer will not now work. I downloaded latest XP drivers from Canon web site, but installation...


I found that some Windows Plug and Play services were note running and were set to start 'manually'. I started those services which seemed related to Plug and Play, and the installation went without further errors.

May 11, 2009 | Canon MultiPASS F80 All-In-One InkJet...

1 Answer

F80 - waste tank near full


Hi

This works on the F30, F60, and F80.
Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Skip step (6) since there is no [OK] key on F30 printers.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Dec 31, 2008 | Canon MultiPASS F80 All-In-One InkJet...

1 Answer

Lost download Disc to canon multipass F80


download driver to suit from canons web see

http://www.fixya.com/manuals/w309774-drivers_software_lost_c_d_come_way

Jan 18, 2008 | Canon MultiPASS F80 All-In-One InkJet...

Not finding what you are looking for?
Nikon F80 35mm SLR Camera Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Photography Experts

Ric Donato

Level 2 Expert

232 Answers

Richard C Cohen
Richard C Cohen

Level 2 Expert

171 Answers

JOHN TOPLISS

Level 2 Expert

180 Answers

Are you a Nikon Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...