How can I get installation program for my A4Tech Optical mouse?

Hi,

I don't there is a driver for this mouse particularly for windows 7. Please follow this link and download the driver. It works.

http://www.driverstock.com/A4Tech-***-35-driver-download/1-1-5434/index.html

Regards.

To obtain your drivers software for this particular device do the following.

Step 1. Go to the A4Tech website and click on Wired Mouse on the left side of the page.

Step 2. Click on Optical Mouse.

Step 3. Click Next until you find MOP-35 image. Click on the image.

Step 4. Click on the Download Driver tab.

Step 5. Click on the Driver for PC button, and this will prompt you to download the driver software in the .zip format.

Step 6. Extract the .zip file onto your desktop.

Step 7. Open the extracted files and double-click on the Setup Program. This program will walk you through installing the driver files and software. Once completed, you may be prompted to restart your computer.

Step 8. Connect your mouse to your computer.

DASD: an IBM-coined term for:

DIRECT
ACCESS
STORAGE
DEVICE

Things do not go better with Coke at least not in this case. You may have done some damage to some circuitry on top of the stickiness on the button. Unfortunately it may need to be evaluated in a computer shop as it's impossible to do anything from here.

why use a floppy disk when u can use a flash drive and boot off it ?

Install the drivers for the mouse & recheck. Hope this helps.

try this link later , The website is under maintenance.

check the mouse settings in the control panel, and be sure it's set to 4-5 lines, and not whole screen.

This is the download page for the driver for your mouse.
http://www.a4tech.com/en/product2.asp?CID=1&SCID=8&MNO=***-35

It is not specifically for Vista, but it should work fine.

Use this link:

http://global.aopen.com/download.aspx

select mice in 'select a product' and then input your mouse model. Hope this is what you are looking for.

cheers