My phone dont want two accept the security code

hi, if the phone is asking for the security code when you switch it on but its not accepting the code you have then all you need to do is give me the imei number off the back of the phone under the battery and i can then give you the phones master code which will give you access to the phone and it will also remove the security code and reset it to what it was when new usually 1234, plz dont enter the wrong code more than 5 times as this will lock the phone and it will be impossible to unlock

let me know then i can assist you further ok

try default passcode 0000 or the last four of your phone number if those dont work you will probably have to contact your phone company to findout if there is a way to. or you may have to do a master reset which resets everything on your phone and may erase your phonebook, downloaded, ringtones, pictures and anything else you may have on your phone.

try three zero's or four zero's. sounds goofy but that's the accepted generic code. Hope it helps.

figure out the security code

easily way :
security code is 123456
good luck !

if the phone is asking for a unlock code and you dont know it no problem just before you enter any code just press the menu botton it will ask you for security code and just enter zeros if 4 zeros does not work press 0 until you can`t enter no more then press accept

good morning ! can you give me the brand and unit of your phone ?

I forget my security code and i also don't know the Ime no.
so plz help me as soon as possible

I try to unlock my phone more than 5 times that is why it's not accepting 12345 no. as well.

Now plz help me fast
Thanks

These are different types of codes.
SIM pin code:
This is a pin code that locks the sim card until you enter the correct code. This protects your account, even
if your sim is put into another handset.
Phone Security Code:
This locks the handset, as opposed to the sim card. Some phones will accept incoming calls with this lock
enabled, but many require the code to be entered even to answer a call. You can also set some handsets to
only accept a "new" sim if the phone security code is entered.
Which is the one that you want?

Not enough memory means your phone is too full of data IE. Pics, Themes, Contacts, Applications, Games etc...
The phone needs a certain amount of memory to function.

Put the airtell card in the phone and in the menu/settings/security/ and you will have either phone lock or phone security.
if you didn't change the code it should be 12345.
if that works swich it to; OFF
if it does not work your service provider will reset it for you.