I lost my user Guide,so, I need some help because i dont know what to do with my remote control,i dont know the intructions! i want the control to work with my Samsung TV
Introduction Programming a Jasco/GE Universal Remote Control takes about seven steps. As with programming other remotes, you need to know the code of the component you are programming into the remote. While some trial and error may be required to get the right codes input to control your equipment, the pleasure at getting rid of several extra remote controls will far outweigh the hassle in getting it programmed. Instructions Difficulty: Easy Steps 1Step OneManually turn on the device you wish to program. 2Step TwoPress the Code Search button on the remote until the indicator light turns on. 3Step ThreeRelease the Code Search button. 4Step FourPress and release the button for the device you are programming. 5Step FiveEnter the three-digit code for the device using the number buttons on the remote. After the code is entered, the indicator light turns off. 6Step SixAim the remote at the device and press the power button. The device should turn off. 7Step SevenPress Channel Up on the remote with the device on. If the device responds, no further programming is required. 8Step EightTo look up a device code to enter directly into the remote, you can visit the GE Remote Code Locator SAMSUNG 002 012 102 103 112 212 502 512 818 914
11547, 11447, 10047, 10093, 10679, 11047, 11147, 11247,
11347, 11781, 11948, 11953, 12002, 12187, 12247, 12434
OK.
414 views
Usually answered in minutes!
im tryin to program a rca remote to an emerson tv
i need instruction and code for mysansui vcr
×