How many wireless connections can a motorola Ap-5131 handle

George-

Contact Motorola Solutions

Get Support

Mark
Motorola Mobility Support

try this - http://blog.michaelfmcnamara.com/2008/05/factory-reset-motorola-ap-5131/

Yes you can use the two together but remember to set the AP6521 as a Access point.

some times your computer's firewall gets in the way, try disabling it then ping again.

Ideally, there shouldn't be any configuration needed. Access points are transparent and only work as a bridge between wireless and wired network so devices should obtain their IP info from your DHCP server not the access point by default.
If you face problems, then there might be a DHCP server in the access point, disable that.

good luck
Othman

go to http:\\ip-adres-of AP5131
wait for login (java must be on your computer; otherwise click on link and install)
enter username : admin
enter password: ????
go to: Network configuraion => Wireless=>Radio configuration=>
and select a chanel.
Make sure when both AP's are to function on one network (+roaming) the channels on both should be different (f.i. choose channel 3 & 6). SSID and key;s should be the same
Make sure to save the changes on the AP.

Click the following link leave feedback if this helped.

Thanks B52Computers

http://support.symbol.com/support/browse.do?WidgetName=BROWSE_PRODUCT&TaxoName=SG_SupportGoals&BROWSE_PRODUCT.isProductTaxonomy=true&BROWSE_PRODUCT.NodeId=SG_AP_5131_1_2&BROWSE_PRODUCT.thisPageUrl=%2Fproduct%2Fproducts.do&id=m4&BROWSE_PRODUCT.TaxoName=SG_SupportGoals&NodeType=leaf&NodeName=AP5131&BROWSE_PRODUCT.NodeType=leaf&NodeId=SG_AP_5131_1_2&AppContext=AC_ProductPage&param_document=sp

exist 2 ways to do it...

first if you now te ip address and the user and password of admin, conect the ap at the ethernet port of you pc and configure it with a ip in the same range that the ap, put the ip direcction in the web browser.

the second way is conect the ap to the serial port and run the hyperterminal if you have windows, maybe you need configure the values of the conecctions.

1) Must be powered
2) Must use crossover cable
3) Connect to WAN port...

else, download the manual, get a serial cable, and connect to the console port using hyperterminal on 19200,8,none,1,no protocol...