Uniden DECT 6.0 Cordless Phone ID - Answered Questions & Fixed issues


Google (uniden)(model)(manual) without parens for instructions.

Uniden DECT 6.0... | Answered on Oct 22, 2018 | 4,593 views


press menu
scroll down until you get global settings
press menu
scroll down to vmwi reset press menu
scroll to yes
press menu
then press end
write this down as it will continually happen

Uniden DECT 6.0... | Answered on Dec 06, 2017 | 292 views


I'm having the same problem as you are. My screen went blank for no apparent reason. I've been searching for a quick fix solution but I keep comming across asinine answers that has nothing to do with the original problem such as this one. If you find a solution before I do, can you please post it? Thanks in advance!

Uniden DECT 6.0... | Answered on Dec 17, 2018 | 7,791 views


This works for the Uniden D1660 and similar dect 6.0 models:
On the lower right corner of the keypad, press the # [silent] key.
One press put it into 'silent mode', another press takes it out.
Good luck!

Uniden DECT 6.0... | Answered on Oct 16, 2016 | 246 views


Contact them direct by phone. We can't help you with stuff like this.

Uniden DECT 6.0... | Answered on Jul 07, 2016 | 78 views


not an option on a landline phone

Uniden DECT 6.0... | Answered on Jul 06, 2016 | 175 views


To set the no. of rings for a Uniden D1680 or similar, try this:

1. Press [menu]
2. Scroll down to 'Answ Setup', press [select] or [ok]
3. Scroll down to 'Ring Time', press [select] or [ok]
4. Scroll down to highlight your choice, '2 Rings', '4 Rings', etc.
press [select] or [ok]
5. Press [back] or [off]
=====================
Good luck!

Uniden DECT 6.0... | Answered on Jun 13, 2016 | 786 views


To set the Answer Machine System's Number of Rings,
model D1680 or similar:

1. press [MENU]
2. scroll to "Ans. Setup" then press [select]
3. scroll to "Ans. Setup / Ring Time" then press [select]
4. scroll through the choices, at desired one press [select]
5. (chirp) press [END] to conclude & exit

Good luck!
--------------

Uniden DECT 6.0... | Answered on May 16, 2016 | 75 views


To reset the Security Code for remote access into the
answering machine system ( model D1680 & similar )

1 press [menu]
2. scroll to "Ans. Setup" press [select]
3. scroll to "Ans. Setup / Security Code" press [select]
4. first digit will be blinking, enter two digits of your choice
5. press [select]
6. press [END] to conclude & exit

Good luck!
-------------

Uniden DECT 6.0... | Answered on May 16, 2016 | 648 views


Try this:

1. Press [menu]

2. Scroll down to 'Answ. Setup', press [select] or [ok]

3. Scroll down to 'Ring Time', press [select] or [ok]

4. Scroll up/down to highlight desired choice of '# Rings',
press [select] or [ok]
5. Press [back] or [END]
==================
Good luck!

Uniden DECT 6.0... | Answered on May 16, 2016 | 90 views


That might be the Voice Mail Waiting Indicator which
is NOT part of the answering machine system.

On the D1680, D1481, and similar handsets,
it is reset (turned off) by:

1. press [menu]
2. scroll down to "Global Setup", press [select]
3. scroll down to "VMWI Reset", press [select]
4. scroll down from "No" to "Yes", press [select]
5. handset will chirp, blinking lamp goes out,
6. press [END]

Other models, check your manual. The model number
is on a small sticker under the battery in the handset --
enter this number at www.manualslib.com to get a free
copy of the User's Manual.

Good luck!

Uniden DECT 6.0... | Answered on May 13, 2016 | 92 views


The easiest way out of "Silent Mode Always On" is to just turn
[ OFF ] the Answering Machine, then turn it back [on].

Use the [ANS on/off] button on the base, do not unplug anything.
Good luck!

Uniden DECT 6.0... | Answered on May 12, 2016 | 139 views


To reset the Voice Mail Warning Indicator ---
(( On the D1680 and similar handsets ))

1. press [menu]
2. scroll down to "Global Setup", press [select]
3. scroll down to "VMWI Reset", press [select]
4. scroll down from "No" to "Yes", press [select]
5. handset will chirp, blinking lamp goes out,
6. press [END]

Other models, check your manual. The model number
is on a small sticker under the battery in the handset --
enter this number at www.manualslib.com to get a free
copy of the User's Manual.

Good luck!

Uniden DECT 6.0... | Answered on May 12, 2016 | 97 views


To obtain a replacement manual, you'll need the precise model
number of your phone: this is found on a small sticker
underneath the battery inside the handset. Take this
model number (eg, D1680) to www.manualslib.com
and you can download a free copy of the manual.

Good luck!

Uniden DECT 6.0... | Answered on May 12, 2016 | 109 views


On the D1680, D1481, and similar phones,
the three levels of ringer loudness plus
"off " are set at the base using the same
[ - ] Volume [ + ] buttons used to adjust
the answering machine message volume.

Pushing the [ + ] and [ - ] keys will
set the ringer to be louder or softer. A
number in the "message counter display"
will report the relative loudness...pushing
[ - ] below level-1 loudness will show
"0" loudness and an announcement of
"Ringer off" will be spoken. From here,
a single push of [ + ] will turn the ringer
on to level-1 and play a ~10 second
sample of the ringer at that volume:
while it is playing the sample ring,
subsequent pushes of [ + ] or [ - ]
will toggle the loudness levels of
( off, 1, 2, 3 ).

Good luck!

Uniden DECT 6.0... | Answered on May 12, 2016 | 110 views


no dial tone . you need to contact the phone company

Uniden DECT 6.0... | Answered on Apr 29, 2016 | 357 views


on the base station and not from hand sets
there is a delete button that looks like a trash can
the instruction in the owners manual is this :-
while playing a message press the trash can ( delete button for each message or
with the system in standby mode ( no one using the phone ) press the delete button ( trash can to delete all at once )

Uniden DECT 6.0... | Answered on Mar 02, 2016 | 65 views


Here's the description from the Unident DECT1560 manual (the model I have).
https://www.uniden.com/File%20Library/FooterNav/Product%20Information/Owners%20Manuals/DECT1560om.pdf
--
Digital cordless phones generate magnetic signals that can cause noise on hearing aids equipped with a telecoil ("T" coil) feature. This phone includes a special "T-coil" mode that, when activated, reduces the magnetic noise generated by the handset.

Uniden DECT 6.0... | Answered on Apr 26, 2016 | 2,849 views


uniden australia service division phone number --1300-366-895
uniden new zealand service division phone number---(09)-2738377
e-mail is [email protected] for australia or .co.nz for new zealand if the phone numkber is not operational try an e-mail as that is their prefered method of contact
basically you need the number of a local service agent that can advise you or fix the fault If the phone is still under warranty take it back to the retailer and get a new unit under warranty as the problem may be in the microphone in the hand piece

Uniden DECT 6.0... | Answered on Jan 19, 2016 | 102 views


Go to manufacturer web site for download of manual.

Uniden DECT 6.0... | Answered on Dec 09, 2015 | 300 views

Not finding what you are looking for?
Uniden DECT 6.0 Cordless Phone ID Logo

1,880 questions posted

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

k24674

Level 3 Expert

8091 Answers

Cindy Wells

Level 3 Expert

6120 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...