Top 20
RCA RCR460 Remote Control Questions & Answers
Code number for LG tv
Do you have the code sheet for the (RCA) Remote,? Any universal remote that you buy,Should have a code sheet with it, First of all make shure it will work with your tv. It is just not that simple as to get a code.There can be up to 5 or more codes for that tv.
10/13/2012 4:55:44 PM •
RCA RCR460...
•
74 views • 0 helpful votes
13D204MR - 13
For more details type in this site name "Electro-help"
either to Google or Yahoo search box [not
in the address bar of your browser], and click search or press
Enter. It is an electronic equipments
service help site.
Note the
position of hyphen in between words in site name. The site will appear as it is in
web; subtitled as Service help to electronic home entertainment equipments.
Pull up older posts.
You can locate this site
name, either at the bottom part of first search page, or at the top of second
page.
Detailed
descriptions are there to help you.
Sometimes,
clicking on advertisements by the side and bottom of each post might help you
to get details about the availability of spare parts; price and more.
Need codes for r560b
Hello
Three digit universal remote codes for RCA remote control are:
000/ 003/ 004/ 005/ 007/ 009/ 011/ 048/ 078/ 082/ 083/ 094/ 096/ 098/ 099/ 101/ 102/ 103/ 107/ 113/ 129/ 133/ 167/ 179/ 181/ 187/ 188/ 194
Four digit codes are:
0031 0004 0048 0054 0094 0100 0102 0107 0129 0191 0005 0009 0000 0162 0163 0342 0003 0015 0022 0096 0113 0125 0179 0187 0188
You haven't given any details of the device to which the setup codes you want to synhronise with. I hereby attached three digit and four digit universal remote codes for RCA.
10/16/2011 7:51:03 AM •
RCA RCR460...
•
94 views • 0 helpful votes
I need the code for
Try 1020 for an Insignia TV. Most RCA universal remote codes can be found at
http://www.rcaaudiovideo.com/remotecodefinder/ . Use the drop-down menus to select your remote and then the type of device that you want to have the remote control.
Please note that the codes in an universal remote control are usually limited to those for devices released 6 months or more before the remote was programmed. If your TV is newer than your remote, you may need a newer remote.
I hope this helps.
Cindy Wells
6/24/2011 8:33:07 PM •
RCA RCR460...
•
421 views • 0 helpful votes
NEED CODES FOR A SYLVANIA
Please try any of the following codes: 1004,1006,1008,1019,1062,1068,1069,1075,1076,1077,1088,1130,1132,1134,1183,1189,1251.
3/18/2011 3:32:47 PM •
RCA RCR460...
•
108 views • 0 helpful votes
How d oi program this remote?
Hi,
Please follow the below steps to set up your programmeDirect Code Entry:
- Find the code your device.
- Press and hold "CODE SEARCH".
- Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.
- Enter the 3-digit code number.
- Release "CODE SEARCH".
- With the device on, press another button to test. If it does not work, repeat steps 1 thorugh 5.
Code Search:
- Turn on the device you wish to control.
- Press and hold "CODE SEARCH".
- Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.
- Release "CODE SEARCH".
- Press ON/OFF repeatedly until the device turns off. You may have to do this up to 100 times.
- When the device shuts off press and release ENTER.
- Try using the remote. If it does not function repeat steps 1 through 6.
To get the code please go to below websitePlease Provide model of your remotedevice to be programmed(VCR,TV)Make name(toshiba,sony)Thanx
7/25/2010 12:04:47 AM •
RCA RCR460...
•
197 views • 0 helpful votes
Cinevision DVD player work with RCA universal
Hi,
You dont have codes for cinevision DVD player.So it cannot be programmed with Codes.
You can try programming withot code
Please follow the below steps.If it dont work then your cinevision DVD player donnot support RCR460 remote.
Code Search:
- Turn on the device you wish to control.
- Press and hold "CODE SEARCH".
- Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.
- Release "CODE SEARCH".
- Press ON/OFF repeatedly until the device turns off. You may have to do this up to 100 times.
- When the device shuts off press and release ENTER.
- Try using the remote. If it does not function repeat steps 1 through 6.
Thanx
5/7/2010 1:07:39 AM •
RCA RCR460...
•
596 views • 0 helpful votes
I would like to auto set up my remote to my tv
HI,
follow the below steps to set remote with out codes
Code Search:
- Turn on the device you wish to control.
- Press and hold "CODE SEARCH".
- Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.
- Release "CODE SEARCH".
- Press ON/OFF repeatedly until the device turns off. You may have to do this up to 100 times.
- When the device shuts off press and release ENTER.
- Try using the remote. If it does not function repeat steps 1 through 6
Thanx
7/4/2010 4:05:26 PM •
RCA RCR460...
•
116 views • 0 helpful votes
RCR460 Remote Control: I need to know how to program my rcr 461 to my tv....
Hi,
Please follow the below steps to set up your programme
Direct Code Entry:
- Find the code your device.
- Press and hold "CODE SEARCH".
- Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.
- Enter the 3-digit code number.
- Release "CODE SEARCH".
- With the device on, press another button to test. If it does not work, repeat steps 1 thorugh 5.
Code Search:
- Turn on the device you wish to control.
- Press and hold "CODE SEARCH".
- Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.
- Release "CODE SEARCH".
- Press ON/OFF repeatedly until the device turns off. You may have to do this up to 100 times.
- When the device shuts off press and release ENTER.
- Try using the remote. If it does not function repeat steps 1 through 6.
To get the code please go to below websitehttp://remotefinder.rca.com/default.aspx?site=rcaPlease Provide model of your remotedevice to be programmed(VCR,TV)Make name(toshiba,sony)Thanx
5/16/2010 4:21:48 PM •
RCA RCR460...
•
314 views • 1 helpful votes
My remote arrows won't work. I cannot got left and
try opening it up and cleaning it with dwd 40 spray make sure its dry before you put it back together if that doesn't work you will need a replacement some good deals on remotes on ebay if you need to replace it
6/26/2010 11:29:02 AM •
RCA RCR460...
•
49 views • 0 helpful votes
Not finding what you are looking for?