20 Most Recent
StarTech.com StarView SV431USB 4-port KVM Switch - Page 9 Questions & Answers
Some channels have disappeared
Not sure about Starview4 but this might give U an idea
Subject: Star View 3 The Box Super when channels discappear ;o)
1. Press menu then Factory Setting & Enter code 0000 to reset.
2. Exit to main menu & enter 1570 to get into the CASS SYSTEM & turn EMU on
3. Reinstall channels (Goto Installation,
Cable network (try TW first & if no channels try NTL then C & W and so on - I'm with Virgin & used the setings for TW) & Voila ;o)
Nb: You may have to redownload channels so reconnect yr box to the computer & follow the link below
http://www.4shared.com/file/76886028/fd4ac296/GTRom_the_box_Super_8102e_081129.html?err=no-sess
& press download !!!
Lost channels
What I did after loads of trial & error trying t follow peoples advice on here so not sure how much of it you need t do (Stage 2) might not be neccessary so try 1) followed by 3) & 4) first ;o) :-
1) Deleted all the channels & reset the factory settings to 0000.
Turned off the box at the plug, left for a couple of minutes & turned back on
2) I reinstalled the software at
http://www.4shared.com/file/76886028/fd4ac296/GTRom_the_box_Super_8102e_081129.html?err=no-sess (Not sure if thats necessary but I did so try this if 3 & 4 dont work without reinstalling)
3) Turned on the Box & went into the menu pressed 1570 on main screen to get into the CAS SASTEM & turned the EMU key ON
4) Reinstalled the channels using Telewest (Even tho I'm with Virgin) & voila, it worked & I can get all the channels again ;o)
Good luck - Stace
New code for starview box
worked for me, got the rugby on
sometimes channels change frequency so they dont work,have u tried a factory reset 0000 to delete,power off at back/on and autoscan ur provider,and emu to on,usually brings them back,do not scan thru splitters as u will lose channels.
Code for starview box
irst upate it from your pc with firmware v3.00
second press menu then type 1570 or what ever your number is to get
into nagravision then go to SET DEFAULT KEY PRESS OK TURN ON KEY EMU
.now exit back to tv it should say channel updating when it gets to %100 and it should work
Codes
try these codes
IRELAND NTL 54-01
KEY 0 =B0 B8 4F 04 E6 5F 87 80
KEY 01 =A3 EB EC 07 D6 49 D2 EB
Lost code to starview
Try these:
C/W 5c-01 May 7th 2009
key 00 = A7 B2 EE 5F 9D D8 69 0E
key 01 = 3D 82 E6 58 8E 0D B3 62
T/W 5a-01 May 7th 2009
key 00 = AA B7 D1 D9 CE 8E 83 AF
key 01 = 8E 80 D7 EF 44 93 02 2B
PURE (UK) NTL 54-01 May 7th 2009
key 00 = 5C 2C 26 36 CF 81 AB 66
key 01 = 2C 10 35 AC 06 57 BE 6F
IRELAND NTL 54-01
KEY 00 =B0 B8 4F 04 E6 5F 87 80
KEY 01 =A3 EB EC 07 D6 49 D2 EB
IRELAND CHORUS 5E-01
KEY 00 =CE 19 2E 87 80 61 74 90
KEY 01 =62 FA D9 F3 CE 05 FA 79
Theboxsv4-rho
00 = be 62 64 fb c3 2c 73 f6
01 = d8 9b e6 5e 3a 0c 45 ae
New codes for ntl
Try these:
00 = AA B7 D1 D9 CE8E 83 AF
01 = 8E 80 D7 EF 44 93 02 2B
00 THE SAME & 01 IS 2C 10 35 AC 06 57 BE 6F ( PURE )
00 = C0 F6 61 87 91 F9 67 57
01 = E8 C9 E5 6E B0 49 53 F5
00 = be 62 64 fb c3 2c 73 f6
01 = d8 9b e6 5e 3a 0c 45 ae
The box super us starview 4
To enter the codes
1 - Press menu
2 - Press 1570
3 - Make sure key emu is on
4 - Enter nagravision
5 - Make sure it says ntl at the top box, if not press right till it says ntl
6 - Key number should be on 00
7 - Go to key data and put this code in *******************(what u have)
8 - Go to key number and press right so its on 01
9 - Press down so you are on key data and enter this code ******************(what u have)
10 - Press ok to save
11 - All done
New digivox t codes
line 1 ce 19 2e 87 80 61 74 90 line 2 aa 26 9e f2 e9 14 d1 ae they are the latest
Nagra 3
there is no nagra 3 the change is to nagra 2 at the moment they were doing it on 1 there is a solotion to it in parts of europe but it wont be in eire/england/sco./or wales for a couple of years they reckon hope this answers your q.
Not finding what you are looking for?