20 Most Recent Hyundai ImageQuest HQP421SR 42 in. HD-Ready Plasma Television - Page 7 Questions & Answers

Please try 0863 for Hyundai Televisions To program your Sky remote control using the 4 digit code

1. Switch on the TV set
2. Press the TV button on the Sky Remote
3. Hold down the Select and Red buttons for 2-3 seconds until the LED blinks twice
4. Press the TV button on the Sky Remote again
5. Enter 0863
6. The LED should blink twice, if not recheck the 4 digit code used and go back to 1
7. Press the standby button on the Sky Remote (The TV should go to standby)
8. Press the Select button to store

If the TV does not go into standby press the TV button then the standby button, then TV then standby, keep repeating this until successful. This will scan the codes used for a particular make of TV.

Please keep me posted.

Thanks.

Lor04

first thing is the obvious, make sure you have brand new batteries installed. If you have a camcorder or digital camera, point it at the remote control and push record, while recording, press some of the buttons on the remote. the camera will record the red light if the remote is working (camcorders and digital cameras can see this light even though people can't) to do this with your digital camera, have somene push and hold one of the remote control buttons while you take a photo, the red ligth should show up in the photo. If you see no red light then you have a bad remote control and will need to send for one or get one ordered through the store, one other option is to buy a universal remote control and try getting that to work, good luck

If this set is under warranty you should return it to get it repaired/replaced by the seller. IF YOU KNOW HOW TO WORK WITH ELECTRONICS REPAIR(board replacement) or have a friend with knowledge/skill you can fix it. With the set on place a bright flashlight again the screen. Look for a moving image around the edge of the flashlight. This will show an image is getting to the screen. You just need a back light to see it. The back light inverter board needs to be replaced. This is the board that controls power to the fluorescent lamps that light the screen. Since you did not give a make and model of the set I can not give more information.

thegoi_16

I can provide you with instructions and codes for DISH Network equipment. I have provided a link with this information. If you have DISH Network equipment, select your receiver model and follow the instructions. At the bottom of the page are links for your receiver model with the TV codes for programming the remote. I hope this helps.

http://www.dishnetwork.com/SupportSection/remote-setup
Ray Calo
DISH Network

I need to know the manufacturer/model of the TV or DVR first.

the source, future shop, dollar store, londen drugs, wall Mart all have universal remotes, and will likely have one that will work with your brand of TV

If you were to log on to the manufacturer's web site, I think you will be pleasantly surprised as usually one is able to download if available, by model number, Customer Instruction Manuals, list of Dealers, for spare parts and service, Driver downloads and Installation Instructions as required.

This is the best way of ensuring up to date drivers for your system and they are free of charge!

I hope this helps.

That is because the tv looks for sync alongside composite video from the tuner, then the AV input and then the type of input and all this takes its brain a little while.
Hope that answers your question.

This is due to condensation on the circuits. Play music is less demanding than dvd. After playing cd for a long while, you may be able to play one dvd, then several in succession later.

You will find the same with most budget models.
They are probably OK, I don't know.
If you are worried, buy a well known Sony or Hitachi etc.
Hope that helps.

1 800 387 4208

The television needs a power supply when it does that. A local repair person should be able to rebuild the power supply for around $150.