1993 GMC Sierra K1500 "back pressure clutch pedal" Questions

Ad

Question about GMC K1500

1 Answer

...pressure back on the clutch pedal after numerous times bleeding it. Then I changed the master cylinder as well and still regain pressure to the clutch pedal. Before replace parts I had pressure but ...

Ad

...back just far enough to clear clutch pressure plate, then remove housing. Remove clutch release shaft from flywheel housing by pulling it through window in flywheel housing until retainer spring ...

Ad

...pressure to release the clutch. check under dash where the pedal joins the clutch master cylinder push rod if its wet its leaking there,if its dry(pull rubber boot back)its the slave cylinder on the ...

...pressure plate spring pushes the pedal back up and depending on how many miles and driving habit those little arms on it break off and just wear out. I hope this helps you. replace the rubber cups or ...

...no pressure changed the Master cylinder as it was broken but still no pressure in clutch pedal please help you need to bleed the air out of the clutch master slave cylinder until you get pressure ...

Question about GMC K1500

1 Answer

...pressure came back fine but I then noticed I had fluid leaking at the clutch pedal from the main cylinder so I replaced the main clutch cylinder and now cannot get the pedal pressure to pump up, I ...

Question about GMC K1500

1 Answer

...pressure back in the clutch pedal.At no time was there any difference in the fluid level for the clutch. Any ideas ? [email protected] Just to be sure recheck the fluid level of the ...

...pressure plate, clutch disc and throw out bearing. I put the trans back in aaand it continued to slip in the exact same way : / . Took trans out a second time, replaced resurfaced flywheel with brand ...

Question about GMC K1500

1 Answer

...back stops after these stop/start operations. THe problem can only really be with the clutch master cylinder. What you describe sounds like the master cylinder is not relieving pressure and this is ...

...back pressure on clutch pedal I am not a mazda guy but it sounds like the pressure plate is bad. Have you check the clutch linkage to be sure something did not slip or break. If so I would be looking ...

Not finding what you are looking for?
Cars & Trucks Logo

508 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...