how do i replace the fuel pump in my 1993 mazda 626 2.5 how do i replace the fuel pump and where is it located in my 1993 mazda 626 2.5 and also to change the fuel filter 1. Relieve the fuel pressure ...
...operation to unlock all 5 doors to a one press operation as most makes offer this as an option. Hi.There is no way of changing 2 press into 1 press. For unlocking all doors - press the remote 2
Question about Mazda 626
I have had my 04 mitsi cedia broken in 2 with no damage and now I cant lock it it half way goes 2 lock but just wont do it put in a claim on your insurance or change the lock
Question about Nissan Cars & Trucks
...2. Turn ignition switch ON. 3. Within 20 seconds of turning the ignition switch ON, press and hold the door lock and unlock switch to the LOCK position for more than 5 seconds. 4. The switching is ...
Question about GMC Cars & Trucks
Changing locks, How many door locks? Driver door n tailgate, so 2, others? Yes, I'm a girl so forgive my lack of mechanical skills, lol. don't change the locks yourself or you will wind up with all of
...lock 2004 honda civic 2 door. The remote for the driver side lock stop locking the door. (have since put in a new battery, didn't help) Then recently the lock was so bad, couldn't get the key in the ...
...2: No automatic door locking or unlocking. Mode 3: All doors and liftgate lock when the shift lever is moved out of PARK (P) with the ignition on and all doors and liftgate closed. All doors and ...
Question about Mazda 626
...2 wires to get it out. Would it be easier to just change the actual tumblers out? Not sure I follow your question, but you can change the lock as long as you get a key blank that matches the chip in ...
Question about Lexus Cars & Trucks
...lock 1/2 way and won't lock the car. Do I have to replace the whole locking assembly? Or is it a key issue? My fob quit working about 3 yrs ago - and will only lock or unlock the other doors except ...
...and check to see if the lock is held in by 2 screws or a "c" clip. Remove them /it and the lock will come out . The lock/barrel and the latch tongue will be integral and will need replacing as a
640 questions posted
Usually answered in minutes!
544 Questions
356 Questions
269 Questions
277 Questions
227 Questions