Question about PfaFF Sewing Machines
...bobbin is winding,the bobbin shouldn't be moving around in the metalcase probably needs tightened. The bobbin winder probably needs a slight position adjustment. However, as Roger suggested, I use a ...
bobbin winding is crucial to getting a good even flow from the bobbin when stitching seams. You want to wind thread smoothly onto the bobbin, across the full width of it, not just mainly in the middle
Question about Singer Sewing Machines
bobbin is seated all the way on the winding pin. There may be an adjustment for it--a technician can probably fix it for you. However, you can also try lifting the thread with a pencil tip just before
...winding of the bobbin, sometimes the spool of thread winds unevenly when it travels up and down the spool. the best solution i have found is to use small spools of thread when winding the ...
Question about Sewing Machines
...for melting and then don't work. Also, take your time winding the bobbin...a nice even wind will center the bobbin. Speed demons cause the bobbin to be unevenly wound and off center. Good
...bobbin winding. It should wind neatly till it can't turn, and then you stop winding; at least this is how it works on the 8000. Perhaps there is some thread blocking the thread guide for the bobbin ...
...bobbin is winding with more thread towards one edge of the bobbin than the other, the bobbin winder motor needs to be adjusted so that the angle of the winder shaft is properly aligned with the ...
I have no tension on my bobbin as it winds and it winds unevenly. I have a Janome 10001. Lightly pinch the thread and guide it as the bobbin winds.
bobbin winder does not wind evenly. how do i fix this problem Slow down when you are winding the bobbin. You are going too fast and it will always be uneven when you do that.
152 questions posted
Usually answered in minutes!
84 Questions
19 Questions
22 Questions
17 Questions
9 Questions