Question about Sharp Aquos Televison & Video
...TV shuts off spontaneously This occurs on some channels more than others and when it does sound can be re-established by hitting the MTS button on the remote and changing to either stereo or mono ...
Question about Sharp Aquos Televison & Video
...TV set only, my other TVs all work fine. You most likely have the SAP mode activated. Look for a button on your remote or an item in the on-screen menus of your television called MTS or SAP. You want ...
Question about Televison & Video
...MTS, STEREO or SAP light on the TV or VCR is on. If the light is not on, try the following: Push the MTS, STEREO, or SAP button on the TV or VCR. Adjust the fine tuning on the TV set to restore the ...
TV: check for SAP or MTS features, set them to STEREO. Also, verify that the TV Speakers are set to ON. Cable Box: If the box has volume controls, make the volume is turned up. Also, check for the SAP
...tv? Press MTS/SAP on the remote (under the number buttons) to go between the 3 options of STEREO or MONO or AUTO SAP. Not all channels will have SAP (secondary audio program). Selecting stereo should ...
Question about Televison & Video
...MTS button located? On TV or remote? Hitachi 42HDT52A It's not on the remote. It's in the Menus on the TV. Go in to the Audio Menu, and scroll down to Audio Sources. This will allow you to change ...
...10 San Diego, CA Mintek TV model where do we find SAP on the remote control or TV settings? A lot of times the remote will have it marked as MTS, this will enable or disable Mono, Stereo, and
TV no sound but pictures ok, changed channels ok The mts/sap function on your television might be enabled. Locate the audio settings on your television and make sure you are set for either stereo or ...
...TV is is possible that the frequency is slightly out or you have poor reception. do a new channel serch first (automatic if you can and see what happens sap may reset also if you do this function. ...
...MTS Stereo NS-27RTV Some Tv's will allow you to simply channel change down for example.. 3,2,1, then the input/or aux channels show up as comp, HDMI,AUX. If you have tried this and it doesnt work and ...
2 questions posted
Usually answered in minutes!
878 Questions
339 Questions
295 Questions
241 Questions
202 Questions