Sony BRAVIA KDL-40S2000 40 in. LCD HDTV "set tv" Questions

tv is set to cable instead of antenna and i'm not able to change it via the initial setup - or anywhere else in the software. Try resetting the TV to the original factory settings. After resetting the

...tv speakers set as output? Go into the menu, select settings,scroll down to speaker settings, set to TV speakers not to audio out, this should get your audio through the TV speakers. Good luck

TV will not remember settings Sony Bravia KDL 40S4011 TV will not remember settings. At startup tv always asked to run channel search even if I've manually programmed favorites and blocked all others.

...TV menu is set to Off , then it is being produced by another device, such as a cable or satellite set-top box. To remove the Closed Captioning from the TV screen, it must be disabled on the device ...

...Thank you very much, If you want to set up tv channels in your tv, connect antenna cable in RF Input at rear of tv, go to tv menu and select preset, then press auto-preset and rest will do tv

have lost all my hd tv stations Hello Just reset the TV to factory settings and retune it using auto tuning fuction from the Menu option. To reset it to factory settings, do the following: Turn on the

...in your model number ..look for firmware updates then download this file onto a formatted USB flash drive.. remove and insert into TV and when turned on the set should pick up the update ...

...set to TV, no matter what resolution you choose it will go back to 480i. If your using HDMI cable make sure that your TV is also outputting at an HD resolution. Like okay let me explain this more ...

...set it? Hello To reset your TV to factory settings do the folloing Turn on the TV while holding down the "Up Arrow" button on the remote control, press the "POWER" button on the TV. [The tv will turn ...

...TV and TV works fine manually. check your tv receiver for problems. There is usually an option for setting for resetting the remote in the settings menu, give that a