Uniden PC78ELITE 40-Channels Base CB Radio "static 2 radio" Questions

...is 1) is the antenna close to any power lines to your home, 2) do you notice any increase or decrease of received signals compared to your mobile, 3) is the static steady or does it come and

static gets badusually around power lines. How can I get rid of this excess noise? You could install a filter in the line between the antenna and the transciever. I reccommend a high-pass or band-pass

...LTD Classic. Installed in 2007 Sterling, standing wave is below 3 has great transmission but will not recieve over a 1/2 mile , hear nothing but static. need to take it in to have the SWR set on ...

...static. i don't know the model number definitely need more information: 1. Have you checked your coax to make sure it is good (with a meter)? Make sure center pin to center pin has good continuity, ...

...2 way point. Disconnect the external speaker plug from the jack. Disconnect any PA speaker plug from jack. Static / voices should be heard from internal speaker. If not disconnect the mic. Static / ...

...then i cant communicate with my old 2 way. when it is in the off mode i always have static. Did you get this solved?? Having the same problem. One handset is perfect the other 2 are constant

...2) Cobra 22 channel Micro talk radios that both just quit together. Only get static when tring to talk on them. Have (4) AAA rechargable in each one that show they are charged up. Both quit at the ...

...and the input area arched a tad. the receive slowly started going down for 2 mins then nothing at all. Any ideas? static electricity? Need help ..thanks Yep it would stereo plug in a mono

...static out of radio i have a cobra 29 with weather channel the squ knob seem 2 b not working sometimes can u help me Turn the squelch down, and the RF gain all the way up. You need to realize that ...

...static but I like to squelch it out. The TX being turned to the right will allow your radio to work at full capacity. If you still don't get reports much over a mile then you can try a power mike to ...