Galaxy Radios DX-949 40-Channels Base CB Radio "cb radio hooked wrong" Questions

CB and accidentally pushed the plug in backwards. Inside the radio, there are 2 big black diodes near the transformers, D8 and D23. Replace these with the same or bigger. You can the burnt one out and

...cb is all hooked up and wont transmitt or recieve what are some possable solutions check the swr's, if its new radio that should be the only thing. .. installed antenna system wrong. ie put the ...

...cb and when I turn the switch to p.a. I still hear the c.b. what could be wrong normal operation. the PA mode is for you to transmit to someone on the outside and to monitor the radio while you are ...

cb was hooked up backwords +-/-+ can it be fixed Some of the car electronics will put crowbar DIODE in the unit, the Cathode will be connected to the incoming positive, and the ANODE will be hooked up

...radio was most likely hooked up to power backwards. When you hook up the positive and ground wires wrong, it will blow the polarity protection diode in the radio. The part is N1004 available at any ...

...CB when I talk on it it I hear myself over my radio speakers. do you have a talk back modification you don't know about or there was one and someone didn't remove it right or the speaker was wired ...

hooked my cb up to the wrong voltage and I blew it up How do i fix it? thanks whats wrong with it? what size fuse have you got? look at the circuit board on the solder side and lok for any burn marks.

...cb radio shop blacklists to make sure that one isn't on the list. This guy owes you either a new radio, or pay to have that radio repaired. If both echo boards didn't work, he doesn't know what he is ...

when i hook up my cobra29 LTd to my pickup it keeps blowing fuses. What do i need to do or whats wrong. HI, my name is John. Red to hot fuse under dash or battery and black to ground hope this was ...

I tried adding talkback/sidetone to my cb radio using a 47 ohm 1/2 watt resistor but it did not work. What have I done wrong? How did you hook it up? IT takes a 470 ohm resistor