Not loading tape The display reads "eject...L" when tape tray is closed with or without a tape in it.When a tape is inserted it does not load. This is the sensor. Not a cheap repair, but something you
...not the tape, I've tried many different tapes with the protection off and had no luck. Is there anything i can do, or am I stuck. I am having the same problem.. Same problem here. same problem here I ...
tape. will not rec nor play back head needs aligned . the tape path is out of lignment. i have a new casstee compartment for this Take the tape out. Cycle the load without a tape in the case. Load and
Tape Eject I can not eject my cassette tape. I charged it for two days and I still can not eject the tape...I get R as an error - Any suggests THE MOTOR IS BURNED UP. THIS WILL NEED REPAIR
tape for that matter...it will not record. It flashes the word "Protection!" And when I check the tapes...its on the right setting that allows them to be recorded on. so that cant be the problem. HELP
...not recording there should be a little tab on the tape that can be moved (the one on my tape is red) if it is closed it stops the tape from being able to record anything and if it is open you should ...
Question about Samsung SC Video Cameras
camcorder for a couple of hours without using it. Then try recording or playing back the tape with it plugged in. Unplug it and check again. If this does not work you may have to replace the tape head
...this does not work, the sensor is not reading that the tape is not protected. It is a service call but not worth the 150-195 in repairs to correct. Sometimes you just need to keep going, and
...not play back. The most tinkering that I did was removing two screws from the tape door, so I could see the tape moving while it was playing. everything is moving okay, and it is properly placing the ...
120 questions posted
Usually answered in minutes!
170 Questions
83 Questions
64 Questions
46 Questions
42 Questions