Question about 3Com SuperStack Computers & Internet
...settings such as ip address and factory defaults can be set through the Console Interface (CLI). You will need a null-modem cable to access this and a terminal client (Windows Hyperterminal works). ...
...Hyperterminal session to that COM port (e.g.: com1), with the port settings at 9600/8/N/1/N (. When the screen comes up blank with a blinking cursor, hit [enter] once or twice to bring up a login ...
...hyperterminal comm settings should be 9600 baud, 8 data bits, one stop bit, no parity, and flow control disabled...assuming no one changed the default console settings on the switches. If you are ...
Question about Power Dsine Computers & Internet
...settings for PowerDsine PD-6024/AC for hyperterminal What are the hyperterminal setting for the "pd-6024/AC" hub. The ones on the website do not and work and Microsemi dont answer their phones. Is ...
TO THE RS232 CONSOLE PORT. WHAT IS nuswitch ds16 CANT CONNECT TO THE RS232 CONSOLE PORT. WHAT IS THE PORT SETTINGS? Just click on default settings in hyperterminal?? if u had not set any in ur router?
...through hyperterminal. I've set all the settings like it says to in the manual but I just get a blank screen. I'm not sure if this switch's serial port baud rate can be changed. Try various
settings sounds correct for your serial comms etc.. if you can see the data coming in on the screen (ie user prompt). Check your serial cable to ensure you have actually wired it up correctly, perhaps
Question about 3Com SuperStack Computers & Internet
...others with problem. One just shows all the port LEDs on and doesnt start at all (connecting with HyperTerminal - nothing on the screen) and the second one starts well, shows all the logs on the ...
...Your new password is set now as 'admin' Best Regards how / where do you enter 'b'? Is that in hyperterminal. I cant get this to work or get any response from the Fastiron Edge 2402's I have but ...
...Hyperterminal default settings would allow you to connect. Your superstack 3 should have a 9 pin male connector at the back labeled "console port" you need to connect this to your serial interface on ...
15 questions posted
Usually answered in minutes!
4 Questions
2 Questions