...will shift normally, please help It's normal for a bike to need to be moving, or "rocked" in order to shift without the engine running, both to get it out of gear, and to get the next gear to
Question about Aprilia Gypsy 50 Motorcycles
when my engine is off That is a common thing with the 250r, Just blip the throttle a little to get it to shift, or you could adjust your idle a little lower to help. don't set it lower than 950rpm tho
Question about Aprilia Gypsy 50 Motorcycles
engine is running at a slow speed. When shifting into second gear, let off the throttle as you shift. Do not power shift, use the clutch always. . The rattling noise could be many things. Is something
...shift with the clutch engaged (Engine not running) just by rocking the bike back and forth and operating the shifter. I do know without oil on the clutches with the engine running there will be to ...
...engine. i shift the way i do due to firstly the bike having 40k miles on it when i bought it so i'm trying to put as little wear on the engine as i can in hopes of it lasting me awhile, and also just ...
...shafts have to be spinning to be able to shift through the entire gear range.Try shifting it with the engine running and see if you get all 5. If you do, there is no problem with the
Question about Aprilia Gypsy 50 Motorcycles
shift trans into gear and engine stops running on a 1997 vulcan shifting trans into any gear and the engine stops running,clutch seems to be working ,,seems electrical There may be a safety switch on ...
Question about Aprilia Gypsy 50 Motorcycles
shift easily when I'm sitting with the engine turned off. The clutch lever is "floppy" and won't engage to allow me to shift gears with the bike running. The "lower" end of the cable moves when I move
Question about Aprilia Gypsy 50 Motorcycles
...engine oil then when shifting only had 1st &2nd, shift linkage was full up position. would over filling the engine oil cause shifting problems No, engine oil would have no effect on the ...
6 questions posted
Usually answered in minutes!
3 Questions
1 Questions