...After we changed it the light was still blinking until he came and put the cover back on from the lamp and the tv started to work. If you are not putting the cover back on the tv is going to
Question about Sony Televison & Video
cover. Lamp cover is not fixed securely in your tv after lamp replacement. Lamp cover is first thing that was removed to replace lamp, check lamp cover and make sure its back in place properly. Thanks
...back cover of theTV, the cover is hot to the touch, so hot in places to make you **** your hand back from the heat. I removed the lower back section ( had to unplug all cables from back cover,Don''t ...
Question about JVC Televison & Video
...back cover off. Grab a leaf blower and blow the dust out. You should do this outside. I have done this on other DLPs and have had good success. It may surprise you, dust can act as an insulator, and ...
...came with tv shows you how if not got the lamp is behind cover on side or frount cover that comes off by undoing two black screws on back corners (each lower corner) anda sharp pull will remove ...
strike apparently. We have tried different plugs. This is a rescued television. you need to remove back cover and check for fuse, if burn try to replace if burn again check and replace power regulator
...back in and turned it on the power light flashes green a few times like normal then a red light flashes and nothing happen hello make sure, you have connected the bulb fitted tightly, also the lamp ...
Question about Philips Televison & Video
...back cover. the best process always starts with the tv unplug from power. after this done have a illuminated room to see what you're doing. This tv has a back cover really easy to un-screw and ...
...back and like turn on again, the tv doesn;t start (lamp and power ligth flashing). I removed the lamp and assembly again, but don't put the lamp cover and still without start, then put the cover end ...
cover been removed with the power cord still plugged in? If so the digital circuits will be detroyed so you wont be able to receive any HD inputs. JVC has a safety fetaure where the HD is destroyed if
137 questions posted
Usually answered in minutes!
405 Questions
364 Questions
299 Questions
263 Questions
243 Questions