Quasar SP-2722 27" TV "color red jump" Questions

...color to just red/green/blue saturation - picture resembles a film negative) until it warms up after a few mintues. It then stabilizes. Literally banging on the set before that point causes the ...

...red hue comes on the screen, with perhaps a flicker and loss of color quality. 2. Within moments of that, the TV screen will flash all bright red and turn off. Also, I've got wood floors, and my 3 ...

color but not the red. Thank you, My Dad had a Hitachi rear projection with same problem blue and red were fine green was out of allignment and could not fix. Problem was the acual projector inside TV

...color is bad though: I know there are 3 primary colors (red, green, blue) that make up each pixel, but I suspect that the blue electron gun is broken because all the pictures have a green or yellow ...

//www.fa-clan.org.uk/dbpic.asp?name=tv1.jpg alt=tv1.jpg > Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal

...red/green/blue outlines or color noise in the background of the images. We're looking for a tech who can fix this set and another one (afterhours for cash - in the Lansing, Michigan area) or someone ...

...red line at bottom It sounds as though you have a convergence problem. This problem is normally a convergence chip ( there are two (2) of them on the convergence board ) If you intend to correct the ...

...red line at the bottom voltages to IC's There's a shielded module near convergence IC's It could be bad too. Check voltages to It.. I had simular problem /replaced IC's did not fix..Replaced module & ...