Proton MM2701VT 27" TV "damp television turns" Questions

My sansui flatview it takes time to turn on its take 2 or 3 dayz like now is off IT SEEMS IT MY BE DAMP OR THE CAPACITORS IN THE POWER SUPPLY NEED TO BE REPLACED

turns on then makes clicking sound The sound may be high voltage arcking inside the TV, High voltage is necessary for the TV to work. It may be damp or dusty inside causing it to arc. If you see white

when the set is turned on there is a clicking sound then it dies I am assuming this is an old CRT TV. In CRT TV's the tube needs quite a high voltage around 30,000 volts. This is generated in the set.

...sound patronising but are you sure both fuses are good?? Might have been in a spare room and got damp on the circuit boards and blown a internal

...needs cleaning. a q-tip and some rubbing alcohol (91% or better!) use very little alcohol- just damp! may have some crud around button. good

damp place,but not for that long,now when i turn it on,5 or 10min later the picture or screen gose green,it turns off,then jumps channels,at one point i was pushing the on/off button and a screen came

...television motor buzzing sound, makes squiggly lines on tv. When the noise stops the picture on the tv is good. Hi and welcome to FixYa, Appreciate the direct "Ask Me". I actually replied to your ...

... Changes channels by itself RCA model 27f520TYX1. Powers off and on by itself especially when it is damp. With the air conditioner on it works OK. It also sometimes keeps searching the cable for ...

Sharp CRT TV from 2007. Won't turn on, makes hissing sound when plugged in. Dampness in the power transformer will cause this, keep it somewhere warm and with good airflow for a while, to dry for a ...

turn on after long time it could be a capacitor or more failing or the control chip failing. crt tv's don't have mean spare parts. as lcd's etc are more easy to get hold of cheap. you may be able to ...