Electrolux EOB6636X Ultrafan Electric Single Oven "overheating cutting hot" Questions

...cutting out and when doing so the power (electricity) cuts out as the digital display dissapears my guess is it's shutting down via a safety device due too overheating as the gas nob is becoming ...

...overheating/cutting out I think 'colburn' has answered this one wrt to cooling fan controller. My problem is similar/identical as described previously. When hot the oven control cuts out until the ...

...overheating and keeps cutting out Might need a new temp probe. The temp probe tells the board the oven temp, but if it fails the hi limit switch shuts the oven down when it gets too hot. On the back ...

...overheating. If the temperature in the cavity gets too hot the overload will operate and cut all power. When the oven cools down sufficiently the power is then restored. My guess is that this is what ...

...hot, the light switch makes a gosh-awful rapid ticking sound that is driving us batty! Can anyone offer a solution? This is done to regulate the temperature. Higher heat settings will let the element ...

...hot the electrics cut out the digital display will stay off (but not the gas) once cooled it will come back on. any advice on which part i should be looking to replace will be greatly appreciated. ...

...cutting out The fan oven cuts out when cooking fatty items at high temperature...it restarts after it cools down.....but it always seems to be fatty things like yorkshire puddings You need to check ...

overheating?? When using the grill, it will turn on and get hot but then it will turn off and stay off for quite a while before eventually turning back on. If you turn the unit back to oven so the fan

...overheating. Food is burning and the temperature light no longer switches off, even with a high oven temperature and a low temp setting on the oven knob. Could this be the thermostat or the cooker ...

...overheating or damage. If there is no continuity then the element will need to be replaced. If the wires are damaged then they will need to be repaired. If the element is ok then you will need to ...