Need to replace tire
SOURCE: How to remove rear wheel of 2006 honda crf150f
well i would say your very brave,,,but how will you balance this new tyer?????or would you be happy to have the bike doing bunny hops down the road???
for what it costs is it realy worth the efort doing it yourself?
SOURCE: how to remove rear wheel on honda shadow
remove brake tension nut, remove bolt on frame bar, loosen bolts on shaft clamp after removing nut on shaft then knock shaft out . must have bike on jack to clear ground when working tire loose .
SOURCE: Needing a manual on how
Put the bike on the center stand or jack up the back end enough to get easy access. Unbolt and slide out the rear axle. If the axle hits the mufflers, take out the lower shock bolts and lower the wheel and swing arm enough to pull the axle and spacer out. Unbolt the brake panel stop arm. The wheel is now resting on a splined shaft. Grab the wheel and pull it/slide it sideways away from the final drive assembly. Now you should be able to drop it out the bottom or roll it out the back of the wheel well. If the tire is too wide to fit between the final drive spline and the swing arm, let the air out of the tire to squeeze it through the gap. Go to the local Honda dealer and purchase a tube of Moly60 Paste and coat the spline on the final drive with it before reassembly.
989 views
Usually answered in minutes!
×