2009 Bajaj Pulsar 200 DTSi - Answered Questions & Fixed issues
Valve clearance
you can get a workshop manual here
http://www.bcmtouring.com/imp/Pulsar_DTSi_Workshop_Manual.pdf
6/3/2014 2:28:23 AM •
2009 Bajaj...
•
Answered
on Jun 03, 2014
•
266 views
Can you tell me about the standard adjustment for
There is only one mixture screw, it is the bronze colored screw on the left hand side of the carb.
Turn left to rich the mixture, turn right to lean it. "Standard settings" is 1 1/4 to 2 1/14 rounds out from a soft seat. (depending on altitude)
I recommend learning how to read your spark plugs for the best possible mixture settings. Remove both of the plugs and check their
electrodes for color.
If its more on the light brownish side your bike is running
on leaner mix if its way too much black your bike is running on rich mix. So
ideally it should be dark-brown(almost black but not black!).
Good luck, i hope this helps.
7/5/2011 4:53:38 AM •
2009 Bajaj...
•
Answered
on Jul 05, 2011
•
367 views
Circuit diagram of bajaj pulsar
Search "wiring diagram bajaj pulsar 200". You'll get lots of hits. Try selecting one of the diagrams shown. Double tap it, then view image.
Dipper switch not working ,only headlight is
are you sure that the bulb is ok as it has two filaments in it and one can blow and the other can still be fine this is very common,check the bulb before you do anything else.
7/29/2021 10:51:15 AM •
Bajaj...
•
Answered
on Jul 29, 2021
•
1,392 views
Bajaj pulser 180 ug4 spedo meter lcd display is not working..how to buy
If the entire lcd display will not work at all then replace it and that’s most cost effectively done by looking online for parts, local bike shops and salvage yards are great too. Check to see which other models have a lcd display that interchanges with your bike which is best answered by asking someone in the parts department at a dealer that sells the brand of motorcycle you are working on.
If it comes on but reads incorrectly this could be a faulty sensor, a sending unit, or electrical issue. A speed sensor Is a common issue when the speedometer is off. Others have a speedometer cable that connects the speedometer and transmission is a common cause of this.
Use the sources online and locally to find parts, also ask around and see who has used parts nearby, ask the service dept. of your dealer or any competent/professional technician and you’ll have this figured out quickly. Research the issue and study before making decisions or spending money!
1/8/2019 7:37:04 AM •
Bajaj...
•
Answered
on Jan 08, 2019
•
72 views
Not finding what you are looking for?