700=TRANSMISSION CONTROL SYSTEM, NEED TO READ TRANSMISSION DTC's ON THE DRBIII(R)
732= TRANSMISSION.....POSSIBLE CAUSES----RELATED DTC'S PRESENT, TRANSMISSION SOLENOID/PRESSURE SWITCH ASSEMBLY, INTERNAL TRANSMISSION, INTERMITTENT GEAR RATIO ERRORS..
Hope this helps ??
Code 700 is mean Transmission Control System (MIL Request);
code 732 is mean Gear 2 Incorrect Ratio.And this is the Diagnostic Trouble Code Table,mainly help you to check the trouble code.Good luck.
700 is for a malfunctio in the transmission. The other is telling you what is wrong (solenoid)
SOURCE: what is code 1494 mean for 2001 dodge neon
P1494 Leak Detection Pump Switch or Mechanical Fault
Part of the early evaporative emission system. (Fuel tank fumes)
It’s there to allow the computer to run an integrity test of the fuel tank, lines and carbon canister’s ability to contain all of the fumes coming from the tank and all line associated with the system.
The code could be set for a number of reasons such as a faulty gas cap, cracked vacuum lines, solenoids & vent valves stuck to the pump itself.
It can be a very difficult fault to cure being it doesn’t take a very big leak anywhere in the system to set the code and that’s if it’s a leak and not an electrical or mechanical fault.
SOURCE: 2005 dodge caravan engine light code p 441
If you mean code P0441 - This Relates to Incorrect Purge Flow for Evaporative Emission System
SOURCE: I own a 2005 Dodge neon SXT. Once in awhile a
The red circle means there is an intermittent problem with your vehicle security.If your car starts and runs fine it would be hard to diagnose until it wont start at all.
550 views
Usually answered in minutes!
×