2001 Nissan Sentra Logo
Anonymous Posted on Mar 03, 2010

Steering problem Dear Experts, I have nissan exalta sta 2001 model and i have problem on my steering, when the car is in idle or moving slowly like about 5kph its really hard to turn and it has air sound but when its running it turns normal soft steering, i have it check but no solution yet. thank you so much in advance.

  • Anonymous Mar 07, 2010

    thank you for concern anss but ive check it already and the amount of the fluid is in proper level, the belt is new and the tension is just right, newly replace kits for pump and the steering no leaks, right now when i turn right its soft even if the car is not moving but turning left is the hard part. the air noise is still there. .anyway thanks man, gud day!

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Champion:

An expert who has answered 200 questions.

Governor:

An expert whose answer got voted for 20 times.

  • Contributor 435 Answers
  • Posted on Mar 04, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Champion:

An expert who has answered 200 questions.

Governor:

An expert whose answer got voted for 20 times.

Joined: Jul 09, 2009
Answers
435
Questions
0
Helped
138338
Points
44

Check the level of the power steering fluid.

  • Anonymous Mar 07, 2010

    Well now it clear for me,you have to remove the piston direction bar,the seals inside are not good,oil is passing through out the seals,you need to verify it,change the seals packs.

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2008 Nissan Altima. I changed the high pressure hose and now my power steering pump doesn't even whine and is hard to steer. What's the problem?

THREE questions edited to join into One. 2 Duplicates DELETED.
Edited to add FULL 'year make model'.
Question moved to correct category.

Hoses should be changed in pairs, because if one leaks, the other will leak not too long afterwards. You may have air in the system, or the pump may have failed. When you are bleeding the system, you have to have the car jacked up at the front and turn slowly full lock left, and full lock right.

https://www.google.com/search?q=2008+nissan+altima+change+power+steering+hose

..
0helpful
1answer
0helpful
3answers

My nissan exalta sta 2000 model, motor idles but dies as soon as you give it gas.. already change spark plugs, tune up, replace engine gasket and fuel filter..

Has the car been running on empty recently? Running with low fuel can damage your fuel pump because on some cars the gasoline is the lube for the pump. a bad fuel pump could be the problem. Look up some YouTube videos on how to diagnose
2helpful
2answers

High idle

sounds like a bad idle air control valve
1helpful
1answer

Nissan 2001 exalta ecu location

Also called Sentra... Engine computer is located under the dash by the firewall. This is where the ecu is located on '01...

8_7_2012_8_38_14_pm.jpg

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.
1helpful
1answer

I have Nissan Exalta2000, it would power off all of a sudden while driving, the 4 icons on the dashborad lit up and if I stop tha car wont start. it happens 3 times and if I get a mechanic they cannot...

hello there, had to do some looking up as to what NISSAN EXALTA 2000 actualy is. i reside in USA and we do not have exalta on our streets. here, its a powertrain aka engine and transmission in a NISSAN SENTRA so it should be very similar to our sentra as far as setups except for different body. I think that you have an issue with the CRANK ANGLE SENSOR. i would start with replacing the sensor. is the SERVICE ENGINE SOON light on??? if so, that could be for many reasons and one of them would be crank angle sensor issue. nissan had problem with those sensors. they would cause the car to die. nissan had campaign / free replacement program in those model years of nissan sentra 2000 year model. have the crank sensor replaced. start there. like i said very common problem.
2helpful
1answer

Where can I buy filter dryer socket for my nissan exalta grandeur gs 2003 model a/t

necesito saber como armar a tiempo las cadenas y engranes del distribuidor del motor para un nissan altima modelo 199 motor 2.4
0helpful
1answer

Transmission problem

you might want to check the brake pads. it might be thin enough to make the wear indicator touch the rotor disc.
Not finding what you are looking for?

427 views

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...