Tail lights don't work, but brake, flash and hazzard work.

check fuses, there's a switch behind brake pedal under dash check it

The light switch controls the tail lights. Look for a fuse for them first.

Replace the electronic flasher relay to cure this.

Fuse #2 10A in underhood fuse box. Also, there's a tail light relay. Check that as well

No they are different systems going to the same place, the tail lights use one fillament in the bulb and the brake and turn signal use the other, a couple things to check, brake light fuse, brake switch (located on the brake peddle) check for power, I have also run into the 4 way flasher that were the problem, more than likely the brake switch

Hazzards run off a flasher , try a new light switch and see if that helps .......there is also the chance the plug comming thru the firewall is loose . Not common but I have seen it do some simillar things

CHECK AND SEE IF THE BRAKE LIGHTS WORK,IF SO CHECK FUSES.IF THE FUSES ARE GOOD YOU MAY NEED A FLASHER.IF THEY WORK WITH THE HAZZARD LIGHTS ON BUT NOT WITH THE TURN SIGNAL,YOU NEED A FLASHER.

check and test the socket ( pig tail ) that the lite plus int for power when the flasher is on. If there is power to it try a different bulb, if there is no power then you will need to trace the wiring circuit back towards the fuse box testing for power at all junctions. Good luck, and remember to rate all solutions you get. Thanx

replace flasher

There is a breaker in your circuit box it is silver mine did the same thing and i had a loose wire on my head light switch and my breaker was blown...