Cars & Trucks Logo

Related Topics:

2005 pontiac montana keeps turning secuity light on

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Jan 03, 2009

SOURCE: real right turn signal light - Pontiac Montana SV6 2005

If the 2005 Montana is similar to the 2001 Montana, I have a solution. First you'll need a hexagonal wrench (the 6-sided L-shaped wrench). The tail light assembly is held on by two screws. You'll need the hexagonal wrench to remove them, because a normal screwdriver won't do it. I also had to use a conventional adjustable wrench to get the leverage to turn the hexagonal wrench, because the screws were in there pretty tight. Once you remove the two screws, the whole tail light assembly should come off. Mine required a little force and I had to play with it a bit, but it came off without a lot of work. There will be one set of wires that connects the tail light assembly to the rest of the minivan--try not to damage that set of wires. Once you get the tail light assembly off, you'll have to take apart the assembly that actually holds the lights. No tools should be required. It's held on by four plastic catches. Just undo the catches (easier said than done, but still not too tough) and it comes apart. Then you can pop out the old light and pop in the new light. Then re-assemble. For me, it went back together much easier than it came apart.

Ad

Anonymous

  • 7 Answers
  • Posted on Feb 14, 2009

SOURCE: 2005 Pontiac SV6 Montana key fob unlocks doors but will not lock

For the sliding doors you need to clean the contacts, there are 6 or 8 on both sides, just wipe them clean as they are probably covered in oil/grease/grime.

gerry bissi

  • 4390 Answers
  • Posted on Mar 21, 2009

SOURCE: program my garage door opener on my pontiac montana 2005

you probably have a garage door opener that changes the code after each opening. I had to push a button on the door motor and then run to the car and push the opener button within 15 seconds. Your car salespwrson is usually an expert at this.

Monster80

Joe Lamb

  • 463 Answers
  • Posted on Mar 30, 2009

SOURCE: how to reset change oil soon light 2005 pontiac montana

Turn key to the on position and press the gas pedal to the floor 3 times.then turn key back off then start it if it blinks at you 3 to 4 times real fast its reset..

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_a3369546f8067589

Anonymous

  • 491 Answers
  • Posted on Aug 27, 2009

SOURCE: 2001 Pontiac Montana trouble code P1133 ???

P1133 .......Oxygen sensor bank 1 sensor 1.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2005 PONTIAC MONTANA FUSE BOX DIAGRAM

On this website you find fuse box diagram for Pontiac Montana SV6 2005 - 2006

Pontiac Montana SV6 2005 2006 fuse box diagram Auto Genius
0helpful
1answer

2005 pontiac montana replaced the battery turns over but will not start

It sounds like your fuel pump. Advance auto has a free battery and alternator test.
1helpful
1answer

Pontiac montana 2005 how do you reset the change oil light.

Pontiac Montana, 2005
With the ignition key in RUN but engine off, repeatedly push the trip reset button until OIL is displayed on the driver info center. Once OIL is displayed, push and hold the reset button for five seconds. The number will disappear and be replaced by 100% of oil life remaining. The percentage will return to 100 and oil life indicator will be reset. Repeat steps if not reset to 100.
Good luck
0helpful
1answer

Pontiac montana sv6 alarm 2005 alarm keeps going off for no reason?

I have a 1999 Pontiac Montana and the factory alarm continues to go off, how do i get it to stop ?
0helpful
2answers
9helpful
3answers

How to reset change oil soon light 2005 pontiac montana

Turn key to the on position and press the gas pedal to the floor 3 times.then turn key back off then start it if it blinks at you 3 to 4 times real fast its reset..

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_a3369546f8067589

3helpful
1answer

Real right turn signal light - Pontiac Montana SV6 2005

If the 2005 Montana is similar to the 2001 Montana, I have a solution. First you'll need a hexagonal wrench (the 6-sided L-shaped wrench). The tail light assembly is held on by two screws. You'll need the hexagonal wrench to remove them, because a normal screwdriver won't do it. I also had to use a conventional adjustable wrench to get the leverage to turn the hexagonal wrench, because the screws were in there pretty tight. Once you remove the two screws, the whole tail light assembly should come off. Mine required a little force and I had to play with it a bit, but it came off without a lot of work. There will be one set of wires that connects the tail light assembly to the rest of the minivan--try not to damage that set of wires. Once you get the tail light assembly off, you'll have to take apart the assembly that actually holds the lights. No tools should be required. It's held on by four plastic catches. Just undo the catches (easier said than done, but still not too tough) and it comes apart. Then you can pop out the old light and pop in the new light. Then re-assemble. For me, it went back together much easier than it came apart.
Not finding what you are looking for?

137 views

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...