SOURCE: How do I find a fuse box diagram for a 2006 Nissan Murano
FIRST REMEMBER THERE ARE SEVERAL FUSE BOXES.. NORMALLY THE CIG FUSE IS IN THE UNDER HOOD POWER DISTRIBUTION CENTER OR FUSE BOX.... A VERY GOOD RULE OF THUMB I HAVE FOUND IS TO CHECK ALL THE FUSES IN THE FUSE BOX....THIS USUALLY PREVENTS CHECKING THE WRONG FUSE AND IT ONLY TAKES A SECOND TO DO IT
SOURCE: Need fuse diagram for 1995 nissan quest
Here is an owners manual file download for Nissan. Go to the vehicle and the year and download the entire manual. It will show fuse locations and the diagram of what each is for. Good Luck!
http://www.nissanextendedwarranty.com/owners-manual/nissan_owner_manuals.html
SOURCE: change brake light on 2006 Xterra
After you remove the 2 bolts there is 2 cone shaped tensioners that help hold the taillight housing on. Grab the taillight firmly on the top and bottom, and pull it straight towards you until the tensioners pop. They will not be damaged and are made to pop in and out.
Then find the bulb housing of the burnt bulb, turn the housing clockwise, and remove the bulb housing, remove the bulb by pulling on the black base of the bulb only on the short sides on the housing. (DO NOT pull on the glass, as it may break in your hand). Then slide the replacement bulb into the housing (it can go in either direction), and repeat the steps in reverse order. to put the housing and taillight back on.
Be careful to tighten the taillight bolts by hand only, they have a plastic thread sleeve that is easily stripped by a drill.
SOURCE: Diagram available for 01 Nissan Xterra Knock Sensor location?
V6 3.3L The sensor is located underneath the air intake manifold on top
of the engine block. This should take an experienced mechanic about 3-4
hours to replace.
Fig. Engine compartment component locations
Hope this help (remember rated this free help) Good luck.
SOURCE: fuse panel diagram 2006 crown vic
The diagram is part of the owners manual, you can access a free pdf copy HERE.
2,586 views
Usually answered in minutes!
×