Blue tooth my 450 gl will not connect to my blackberry even though my blackberry will link with the bluetooth in my bmw

I just got my blue tooth ear phone to work with my laptop, sounds like you want blue tooth car to pickup on your phone speech and sound. You probably have to enable blue tooth on your phone and connect to the bluetooth receiver in the car. Probably be good if blue tooth receiver is on so phone sees the signal, that's the way mine worked, it showed that device, I clicked it to connect. Hope that helps.

have you made sure with nokia site that this blue tooth is compatible with your phone??

is you phone not even detecting the device?

obvious question , sorry , have you got the radio hand book to follow the set up procedure , sometimes the bluetooth will only accept a certain amount of connections and then needs to be reset , otherwise might be a question for I phone

Hi
You have a week battery and you need to replace it.

hi.
the manual is available form ebay, usually for under £5.
i would advise you to check with your jaguar dealer first though, as quite a lot of s and x types (mine included) had the radio, and all the keys to suggest the blue tooth connection, but did not actually have the blue tooth connection unit fitted.
your dealer will be able to tell you if your car actually had the unit fitted, or if the keypad that you can see fitted in your console is just there to fill up the space.

Normal 0 First turn on bluetooth option on your cell. Then open Lexus manual and follow the instructions.

i dont think the cars radio is Bluetooth

if it isnt you need to buy a blue tooth module for the car

they start at about $250

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

with a wire duh!!!!!!

if you see a blue tooth sign it will have blue tooth, best to fine out from a main dealer

When u want to pair your bluetooth phone the first time, you must do this in the first 30 seconds after ingnition. This is the only period your audi bluetooth carkit is in search mode. Follow these steps to make it work:

Put your bluetooth phone in search mode, then start your car. Your phone will now detect something like AUDI UHV-1 or similar. Connect to this device, and enter either code 1234 or else code 0000. Your phone will then connect. Command your phone to keep the Audi device listed as a save connection, which can automatically connect. The next time you enter your car it will connect by itself (after ignition that is).