20 Most Recent 2004 Toyota Land Cruiser - Page 6 Questions & Answers

have the wheel bearings been replaced?

then it's the check engine light. Connect a scanner to know the codes so you can know what is failing?
http://www.google.com/imgres?imgurl=http://www.autonorth.ca/storage/check_Engine_light%3F__SQUARESPACE_CACHEVERSION%3D1239148750196&imgrefurl=http://www.tahoeyukonforum.com/forum/showthread.php%3Ft%3D3219&usg=__lJgH4Y5_6d6tR41hoqkFZp6Nqo4=&h=300&w=400&sz=9&hl=es&start=0&zoom=1&tbnid=4b5Ni3AgGvjH7M:&tbnh=150&tbnw=223&ei=25YKTt7OEZO_gQevhvWiAg&prev=/search%3Fq%3D2004%2Btoyota%2Bland%2Bcruiser%2Bcheck%2Bengine%2Bservice%2Blight%26um%3D1%26hl%3Des%26biw%3D1280%26bih%3D626%26tbm%3Disch&um=1&itbs=1&iact=hc&vpx=574&vpy=247&dur=715&hovh=194&hovw=259&tx=168&ty=80&page=1&ndsp=15&ved=1t:429,r:7,s:0
If you have troubles contact me, i have the repair manual of that car

check lh door crash sensor or wiring - flash code 35

If it's all the cylinders on a bank, then it sounds like the timing belt jumpped a tooth or two. You should check it out ASAP as it may fail and ruin the valves.

ARE YOU WAITING UNTIL THE GLOW PLUG WARNING LIGHT GOES OUT DIESEL ENGINES REQUIRE THE GLOW PLUG TO WARM BEFORE IGNITION

THIS COMES ALL FROM "WAIT TO START" DO YOU WAIT TO START? IF NOT,THEN THE GLOW PLUGS ARE BUR'NT OUT,WHICH YOU WILL NOT NEED UNTIL FALL. OR MAYBE YOU'VE GOT IT HOOKED ON EITHER,STARTING FLUID,IN WHICH CASE,I SUGGEST YOU REPLACE THOSE GLOW PLUGS NOW.OR ELSE YOU'RE MOVING ON TO EVEN WORSE ISSUES.LET ME ASK YOU THIS,WHY ARE'NT THE GLOW PLUGS BEING DENIED POWER? AFTER ALL THEY START THE ENGINE? AFTER YOU INSERT THE KEY INTO THE SWITCH,WAIT TO START,LIGHTS UP.IF YOU'VE NOT WAITED UNTIL THAT WAIT TO START LIGHT GOES OFF,,,YOU'VE BURNT THE GLOW PLUGS UP.THE ONLY THING TO DO IS REPLACE THEM ALL.IF YOU'VE BEEN USING STARTING FLUID OR EITHER TO START YOUR ENGINE FOR A LONG PERIOD OF TIME,FORGET REPLACING THE GLOW PLUGS,BECAUSE YOUR ENGINE IS ADDICTED TO THE BOTTLE(EITHER) YOU MAY BE ONE OF THE LUCKY ONES,REPLACING THE GLOW PLUGS MAY RESOLVE YOUR ISSUES.BUT,WAIT TO START,,AIN'T NO JOKE. BEST OF LUCK TO YOU & YOURS!

you may have a shock sensor for an alarm the was somehow set, and this light show is to tell you it was tripped-try disconnecting the negative terminal to the battery and let it sit for 5 minutes, then connect it and start the car-see if it still does it (or does not).

You can download the entire service manual (Which I presume contains a wiring diagram) from:
http://rapidshare.com/#!download'214tg2'52017445'PdfTown.com-1998-2007LandCruiser.zip'57872

Hi Waynee,
You forgot to say which engine is in your vehicle?
The HZ engine has timing gears and a timing belt (That's a diesel engine) the belt drives the injector pump
The KZ engine also has gears and a timing belt,. (Also a diesel engine) same as above.
The RZ engine uses just a timing belt (And that one is a petrol engine)
Regards Johngee10

Was the O/D ON/OFF button hit by accident on the shifter? Its a small little pushbutton. Hope this helps