2003 Volvo V50 - Answered Questions & Fixed issues

Maybe can find information about this in the Volvo Owners Manual

Hope helped.

Depending on production date it's on the small display between speedo and tachometer, or on the radio/climate control display in centre console.

Use the right button in the instrument cluster.

Of course it is, you can even have them custom made at reasonable cost but no need to when you can buy them off the shelf from these fine folks. (Scroll down to 8th item)

I suppose your dealer also tells you that you have to buy a new car when the ash trays are full...

Take your custom elsewhere in future and write a letter of complaint to the Volvo importer/distributor in your country. This is the sort of customer service which usually ends up in a dealer having their franchise removed if enough owners complain.

I hope that you have found my reply to be of use, please return the goodwill by rating my answer :-)

yes all modern vehicles have stelite coated valves for unleaded so it will work ok

hello u'd need a proper manual for this in my opinion like there are plenty of dealers and online shops that deal in those.. you can get some free at reliable-stor e and it;s actually really illustrative

You will get your solution and all info on service info, repair info, parts info, wiring/electrical/fuse diagrams, error/fault codes, torque specs, PCV, , owner's/service/repair/parts/maintenance manuals etc everything this website www.reliable-store.com it's a very good website for vehicle problems even as old as 1991 ford..

I suggest you get one of those manuals people get nowadays to do it yourself.. My brother use it to repair my car and it's totally repaired now. Here's the website he got it from. www.reliable-store.com

You will have to remove the ignition barrel and look to replacing lock and barrell. I would stongly suggest using a specialist or main dealer as this is a complicated job.

Check CEM

DEFINE LOOSING THROTTLE

Check the tailgate switch.

On the tailgate latch inside the gate.

you need someone with an obd scanner to read the engine management light this will then give you the error code to tell you the problem its picking up.

means that the ECM has put the engine in limp mode to protect it from serious damage That means that you have to run the fault codes to determine what sensor reported a problem and to have that problem fixed asap

glow plugs.