20 Most Recent
1991 Cadillac Brougham - Page 4 Questions & Answers
Sqealing
Two things to check. If your car has a harmonic pulley on the crank shaft check that it is not slipping on the rubber insert and squealing. Second point is when there is no need for power steering ie straight ahead or idling there is no load on the pump so it will feel ok but as soon as you move the position of the steering wheel the valves close off and the pump comes under load. If the drive belt only drives the power pump and it broke then I would suspect a problem in the pump. Check that the belt is the correct size for the pulley groove as if it is too small the belt will run on the bottom of the pulley and slip, and squeal.
7/25/2013 7:37:45 AM •
Cadillac...
•
Answered
on Jul 25, 2013
How to fix a neutral safety switch on a 99 grand am automatic
There is no REPAIR for the switch but to Replace... There is replacement. There is a Lever that is held on by one NutThere is 2 Bolts that hold the Switch on the Transmission.You also need to POP the Cable off the Ball on the LEVER... Reinstall in Reverse Order
4/8/2013 5:12:03 PM •
Cadillac...
•
Answered
on Apr 08, 2013
How to install an instrument cluster on 1990 cadillac brougham
there are a few philips head screws on the bezel and after you remove that you will need a 9/32 or 7mm socket to remove the 4 hex head screws . you will also have to pull the selector indicator cable before you access the plug on the back , once you can get to it squeeze top to bottom and it is out
10/18/2012 8:30:57 PM •
Cadillac...
•
Answered
on Oct 18, 2012
Timing belt markings
Sorry Mark, It is impossible to provide you with a solution for your question because you failed to mention YEAR, MAKE, MODEL, and ENGINE SIZE. ALL of this information is necessary to provide you with the information you are seeking. Personally, I belive that if you do not know any better than that, you should probably not be messing with it.
2/11/2012 9:46:19 PM •
Cadillac...
•
Answered
on Feb 11, 2012
My 1989 cadillac idiles low
remove and clean the IAC idle air control it is probably sticking and giving a low idle. or replace it if need be. it should idle at about 7-800 rpms, i think thats why it quits when you turn the wheel. it is putting more stress on the pump and the engine. check idle. Good-day !
8/25/2011 12:46:59 AM •
Cadillac...
•
Answered
on Aug 25, 2011
Not finding what you are looking for?