20 Most Recent 1994 BMW 318 - Page 6 Questions & Answers

BET YOU REPLACED THE CRANK SENSOR ON THE HARMONIC BALANCER, CAM SENSOR IS ON THE CYLINDER HEAD.

You don't want to try that yourself. Take it to a shop so you won't cause expensive damage to the engine.

Google search for the manual

better off just buying a Chiltons manual for it. $20 and you can do everything to it.

is it safe to drive with a po700 code for bmw?

It might not need to replace the belt but to adjust (tighten) them. Check for a loose one and adjust it. Does the noise changes or stops if the AC is on or off? Or if you turn your steering all the way to either side?

Have you checked your ignition switch? Generally it is located "behind" the keyhole. It is a cylinder shaped thing that has contacts that might be worn or dirty.

This fault needs Authorized Service Station's attention. Contact Authorized Customer Care.

This light is telling the brake master cylinder is low on fluid

tow bars are mad specific for each make and model of car. As they have to be certified for the fitment by a qualified fitter then this is a job outside the legal expertise of the average owner. I suggest that you have a tow-bar fitting shop fit it for you and they will have the correct wiring for the trailer plug.