20 Most Recent
Polaris 2008 Sportsman 500 H.O - Page 5 Questions & Answers
How to change coolant in a 2008 Kawasaki diesel 3010
1. Park your mule on a level surface and remove the drain plug from the bottom of the radiator using a socket wrench. Drain the coolant into a pan or onto the ground.
2. Remove the radiator cap and top off the radiator with fresh coolant to the level indicated on the side of the tank.
3. Install a new coolant filter on the coolant lines.
4. Add the appropriate amount of coolant to the radiator and make sure that the level is where it should be.
5. Reinstall the radiator cap and drain plug, then start the engine and let it run for several minutes to allow the new coolant to flow through the hoses.
6. Let the engine cool, then check the coolant level again. Add additional coolant if necessary.
7. Replace the coolant filter once a year to ensure that your engine stays in top condition.
2/22/2023 7:16:34 PM •
ATVs
•
Answered
on Feb 22, 2023
I have a 2004 sportsman 500 HO, where is the fuse box located
The fuse box on the 2004 Sportsman 500 HO should be located under the hood, near the battery. On the left side of the battery box, look for an access panel with a fuse cover. This cover will provide access to the fuse box.
2/14/2023 10:01:27 PM •
ATVs
•
Answered
on Feb 14, 2023
Fuse box location on 1999 polaris mag 500
The fuse box should be located near the battery. It is usually near the front fender. The cover should have a diagram of the fuse layout, which should tell you what fuses are located in the box.
2/14/2023 9:58:27 PM •
ATVs
•
Answered
on Feb 14, 2023
2005 eton atv viper 90r 2 stroke engine dies when put in gear
This could be caused by a few things. There could be an issue with the clutch, the CDI (capacitor discharge ignition) unit, or the ignition coil. You may need to have a mechanic inspect the components to determine the exact cause.
1/10/2023 1:05:54 PM •
ATVs
•
Answered
on Jan 10, 2023
Not finding what you are looking for?
