2If it ain't broke... then it'z just a matter of time before yer gonna have ta fixit... :)
Carl Thompson posted an answer for this Dodge Cars & Trucks:
"yup, it quit. easier to get an aftermarket stereo and compatible install kit."
Carl ThompsonCarl Thompson posted an answer for this 1987 Ford F 150:
"make sure your exhaust is flowing freely and the catylitic converter is also."
Carl ThompsonCarl Thompson posted an answer for this Chevrolet Cars & Trucks:
"check that small black module under the distributor cap, these are heat sensitive and will..."
Carl Thompson
Carl Thompson posted an answer for this 1998 Ford Ranger SuperCab:
"you'll need to go to your local garage to see where you can locate a quick disconnect kit..."
Carl ThompsonCarl Thompson posted an answer for this Cars & Trucks:
"check out the local walmart, i'm sure you can find a stereo install kit for your vehicle."
Carl Thompson
Carl Thompson posted an answer for this Toro Garden:
"check and see yhat your points are not dirty or sticking together, use a folded matches..."
Carl Thompson
Carl Thompson posted an answer for this Tools & Hardware - Others:
"all depends on what type of abrasive your using, the product should say on the package."
Carl ThompsonCarl Thompson posted an answer for this Dodge Cars & Trucks:
"have a look under the hood, and inspect the vacuum lines, possible one got disconnected..."
Carl ThompsonCarl Thompson posted an answer for this 2001 Chevrolet Silverado 1500:
"mains : 65 - 70 lbs ; con rods 40 - 50 lbs."
Carl ThompsonCarl Thompson posted an answer for this Chevrolet Cars & Trucks:
"check and make sure your harmonic balancer is still in one piece, sometimes this rubber..."
Carl ThompsonCarl Thompson posted an answer for this Cars & Trucks:
"have the c v joints checked."
Carl ThompsonCarl Thompson posted an answer for this Cars & Trucks:
"you said you got fire and fuel, hows the airflow."
Carl ThompsonCarl Thompson posted an answer for this Pontiac Cars & Trucks:
"just like it says, 5.7 litres."
Carl ThompsonCarl Thompson posted an answer for this Cars & Trucks:
"dexron/mercon."
Carl Thompson
Carl Thompson posted an answer for this 1993 Chevrolet S-10 Blazer:
"check and make sure the sparkplugs are clean, I got a hunch it could be that small back..."
Carl ThompsonCarl Thompson posted an answer for this Cars & Trucks:
"could be a bad ground to engine, clean and reinstall."
Carl ThompsonCarl Thompson posted an answer for this Cars & Trucks:
"use a screwdriver to remove the screws that attach the horn to the wheel and disconnect..."
Carl ThompsonCarl Thompson posted an answer for this Cars & Trucks:
"it does make things easier."
Carl ThompsonCarl Thompson posted an answer for this Cars & Trucks:
"start with 15 foot pounds, then 30 foot pounds, then 45 foot pounds, then finally 65 foot..."
Carl ThompsonCarl Thompson posted an answer for this GMC Cars & Trucks:
"the module should be on the inner driver side fender."
Carl Thompson
Carl Thompson posted an answer for this 1994 Chevrolet S-10:
"check to make sure the catylitic converter is not clogged."
Carl ThompsonCarl Thompson posted an answer for this Dodge Cars & Trucks:
"I would check the brake switch at the pedal."
Carl ThompsonCarl Thompson posted an answer for this Oldsmobile Cars & Trucks:
"find your tv cable at the throttle body, there is a d type button, depress this while..."
Carl ThompsonCarl Thompson posted an answer for this Dodge Cars & Trucks:
"check your distributor pick up wires, make sure they are not crossing."
Carl Thompson
Carl Thompson posted an answer for this 2001 Chevrolet Cavalier:
"check the transmission fluid."
Carl Thompson
Carl Thompson posted an answer for this Building Materials:
"must be something obstructing the laser sensor."
Carl Thompson
Carl Thompson posted an answer for this 1998 Dodge Dakota:
"yeah, it does sound like dirty fluid or even that solenoid, which is usually the shifting..."
Carl ThompsonCarl Thompson posted an answer for this Dodge Cars & Trucks:
"your best bet would be to call an auto wrecker, i'm sure he'll have a couple durangos..."
Carl ThompsonCarl Thompson posted an answer for this Husqvarna Garden:
"sounds like the bearings on one of the pulleys are grinding, remove the deck and do a..."
Carl ThompsonCarl Thompson posted an answer for this Chevrolet Cars & Trucks:
"check and make sure the coil didn't burn out, they are heat sensitive."
Carl ThompsonCarl Thompson posted an answer for this Chrysler Cars & Trucks:
"your headlights are most likely the halogen type, when these headlights burnt out, it is..."
Carl Thompson
Cars & Trucks 113 answers
Garden 3 answers
Computers & Internet 3 answers
Tools & Hardware - Others 2 answers
Office Equipment &... 2 answers
Building Materials 1 answer
Saws 1 answer
Audio Players & Recorders 1 answer
Televison & Video 1 answer
