Initial Televison & Video - Page 4 - Recent Questions, Troubleshooting & Support

0helpful
1answer

My tv has had start up issues - sound but no picture on initial startup. After multiple on off cycles it usually starts. Yesterday it would not turn on at all.

Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electro-medical.blogspot.com/ http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
1/12/2016 2:33:54 AM • Initial... • Answered on Jan 12, 2016
0helpful
1answer

What is the Dish Network remote code

call dish cust service/support and they will help you resync:1 (855) 318-0572
1/6/2016 1:35:06 AM • Initial DTV-321... • Answered on Jan 06, 2016
0helpful
1answer

Yellow vertical line approx 100mm from left after initial setup

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electro-medical.blogspot.com/ http://electronicshelponline.blogspot.com/ Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.
12/27/2015 7:05:55 AM • Initial... • Answered on Dec 27, 2015
0helpful
1answer

Trying to diagnose a plasma tv

Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electro-medical.blogspot.com/ http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
12/10/2015 12:24:23 PM • Initial... • Answered on Dec 10, 2015
0helpful
1answer

How do I change the region on my TV?

You have to reset the tv. as you have didnt mentioned anything about the brand and model number its not possible to added how to reset the tv. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience http://electro-medical.blogspot.com/
11/17/2015 6:01:11 PM • Initial... • Answered on Nov 17, 2015
0helpful
1answer

My portable dvd player quit working, will not charge.

Could be that the batteries have outlived their usefulness. check that out - also make sure that your charger is properly working.
10/14/2015 8:00:54 PM • Initial... • Answered on Oct 14, 2015
0helpful
1answer

40RV52U stuck in initial setup mode

Hi Marc, I think that you need to have a technician look at it. Unless of course it's still within warranty, in which case return it for replacement/ repair.
7/26/2015 10:05:27 PM • Initial... • Answered on Jul 26, 2015
0helpful
1answer

Why does my TV say No Disc when I have inserted disc

Try several discs. If it happens with all of them it confirms that you have a problem with the disc player. You'll probably need to get a technician to look at it.
7/20/2015 3:00:11 AM • Initial IDM-1731... • Answered on Jul 20, 2015
0helpful
1answer

Can I project my Initial IDM 1295 DVD player onto my 42 inch LG HDTV screen like I would a regular DVD Player? If so, how

Not possible without major modifications. This unit was designed to be stand-alone, so the only output options were for audio, if you wanted to connect it to a receiver for better sound. As there are no provisions for video output, either analog or digital, I'd say you are out of luck.
6/24/2015 11:53:26 PM • Initial IDM-1295 • Answered on Jun 24, 2015
0helpful
1answer

I am having trouble with the initial setup of channels, I can't seem to lock in the HD channels when going thru the beginning setup

The normal method is to do a full auto scan and once it's at 100% store or save the scanned list?if you try to do it manually you will take ages because some channels the polarity switches and parameters for the horizontal and vertical parts of the dish change frequency. so make sure the cable is connected properly into tv or smart box and rescan.once it's reached 100% look for the save or store button on screen.the hd channels should be automatically put within the saved list and usually colour coded in the menu.when selecting channels.
4/2/2015 2:44:10 AM • Initial... • Answered on Apr 02, 2015
Not finding what you are looking for?
Initial Logo

329 questions posted

Ask a Question

Usually answered in minutes!

Top Initial Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an Initial Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...