Questions & Answers for: Samsung no vertical sweep

...vertical position, and then static. In my opinion I need another monitor, or?? Thank You Detrix Hi Detrix, Check with www.lcdrepair.net if you want a repair. Something is wrong with your LCD ...

...vertical blanking??) contains these retrace lines as well as some compression of the entire sweep for about .375 inches. I am not sure if there is any foldover or not of that area at the very top of ...

...vertical sweep system on that model and big screens in general. These repairs can possibly be done by consumers with basic electronics knowledge. If you want to repond with test results we can supply ...

set has lost vertical sweep or the feedback from that circuit. This will shut the set down to prevent a horizontal line from burning the face of the CRT. This will have to be looked at by a technician

...vertical sweep circuit problem. There is an IC chip that controls this which may have failed or the capacitor for the IC has failed or both. The third possibility is that a fuse on the power board ...

vertical white line Horizontal sweep fail is the fault. Check the connection socket that goes to main board from deflection yoke. If it is loose, this type of fault can occur. Unplug it once and ...

my samsung ultra slim tv displays half black horizontally Check its vertical sweep output section circuit for fault.

...Vertical sweep problem. Vertical scan output section circuit should be checked. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. ...