Questions & Answers for: Nissan Pickup sams master

Question about 1992 Pickup

1 Answer

1984 Pickup Had to get towed today. Truck would not go into any gear after I stopped It seemed to not disengage and truck would shut down when braked to a Stop. Clutch pedal seemed to have no ...

Ad

Question about 1991 Pickup

1 Answer

Soft/floppy clutch clutch pedel is soft, is there an adjustment? This is probably a hydraulic clutch. check for fluid at the clutch master cylinder, if empty check for a leak at either master or slave

Ad

i have a 91 nissan d21 and cnt find the slave cylinder or master slave cylinder? The master is beside the brake master cylinder, between the brake cylinder and the fender. Follow the line down to the ...

1987 Nissan PU, I replaced the master and slave clutch cyls. I bleed the system and there is no air in the lines but peddle does not get hard. Could the new master or slave cyl be bad? I see you can ...

Question about 1985 Pickup

1 Answer

cluth has to be on floor to shift your truck has a hydraulic clutch, which has a master cylinder next to the brake master cylinder. Check the fluid level. If it is low or empty, you have a leak in the

trying to bleed clutch line in 1997 nissan pu xe 2wheel drive.\r\nhave removed old fluid and removed and overhauled master cylindar. refilled lines and resivour with brake fluid. clutch peddal has ...

clutch looses pressure, leaking by clutch peddle Clutch master cylinder is leaking out of piston cup.Detach from clutch pedal, disconnect hydralic line, and remove 2 firewall retaining bolts or nuts ...

Clutch suddenly has no resistance and car won't shift gears. Fluids were low, have put fluid in the reservoir but still doesn't work. How do you bleed a clutch line? on the transmission there is a ...

Question about 1995 Pickup

1 Answer

my dash lights come on when my brakes are pushed in my 93 nissan pick-up If you mean the brake warning light on the dash is coming on, it is telling you that you have a problem with your hydraulic ...

replaced all brake lines no leaks but cant get it to stay up both front lines center lines both front calapiers. one hard line.no leaks what would cause it not to pump up and stay? Most likely causes:

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...