Questions & Answers for: Plymouth Breeze pli

FUEL PUMP 1996 PLY BREEZE IS IT IN THE FUEL TANK? Yes it is. Yes it is in the fuel tank

Ad

Question about 1997 Breeze

1 Answer

97 ply breeze 2.4 no power to the fuel pump fuse is ok replaced relay still no power ok then, next step is check wiring. looked for open copper touching the frame or chafing through the harness. Then ...

Ad

i got a 1998 plymouth breeze, ran great till driving down road and car just dies and wont start, not clicking when try to start starter and altenator tested and both good. getting power to everything ...

Question about 1999 Breeze

2 Answers

1999 ply breeze are the rotors free standing or do i need to remove the center nut just need to remove the calapier and calapier bracket the center nut is only for axle Hi, there is no need to remove ...

98 ply breeze heater blows cold air, replcd water pump, radiator, thermostat, filled w/coolant, no leaks inside car, both h/c hoses are warm, bled coolant system, fans work. Would the heater core be ...

1999 ply breeze wont fire on #1 cyclender Replace plug wire (least expensive fix)Replace ignition coil (more expensive).Should be either of these two items.

Question about 1996 Breeze

1 Answer

96 ply breeze ignition key sticks It could be a couple of things. 1) try lubricating the key and key lock in column.2 if your steering wheel is turned and has pressure on it, relieve the pressure by ...

2008 ply breeze 2.0 no vacum at brake boostor or pvc 2008 ply breeze 2.0 no vacuum at brake boostor or pvc Start at the booster & pcv & work your way back to the vacuum source.

99 ply breeze pass side rear signal light changed bulb bulb i took out looked good still does not work stop light was out so removed tail light and replaced bulb works now but signal light does not ...

engine stumbles on acceleration on 97 ply breeze 2.0 liter I would try new spark plugs and wires.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...