Questions & Answers for: Hayward open filter

...the sring clamp on the hayward pool fil i loosened the spring clamp on the filter, but filter clamp will not open. once the ring is unthreaded it may need a good hard tug to open the filter

...open or 'on', the multiport valve (on the filter) should be set on 'filter'. What do you mean by drain valves though? if you are vacuuming through your skimmer, your multiport should be set to filter ...

...filter, with the pump off open this valve and open the air bleed then work the bump handle up and down to loosten the DE in the filter. Then turn the pump on and off (2-3 seconds) once or twice let ...

...open), allowing the filter tank to fill with water. WARNING: ALL SUCTION AND DISCHARGE VALVES MUST BE OPEN WHEN STARTING THE SYSTEM. FAILURE TO DO SO COULD CAUSE SEVERE PERSONAL INJURY. Once water ...

cloudy water chems OK,--- replaced DE powder but still cloudy. Opened up filter to wash down fingers and noticed that the DE powder was on the bottom of the tank rather then coating the fingers. The ...

...filter for inground poola do i have to open the valve to waste when i just want to recirculate no ... waste dumps the water ... recirculate recirculates but does not filter ... filter filters the ...

...open pool for my first time....not sure what to turn valves to so water will run into the filter from pool red valve handles align with flow of water long ways the tail in direction of pipe valves ...

how do you open air bleeder on sand filter when backwashing what does it mean to open air bleeder bleeder valve on top of multiport

...open still no water close valve fill filter chamber with a hose close glass cover start pump and open valve immediately.2 pump room above pool level, close inlet valve fill pump filter with water ...

filter lid stuck open Open all air & drain valves, if multi-port valve - place in "Winter" mode. If push pull type valve place between positions. This will relieve any siphon & pressure in the