Questions & Answers for: Suzuki VS 800 Intruder cylinder arrangement

Question about 1993 VS 800 Intruder

1 Answer

...If the new battery just makes the starter grunt and not turn, your rings may have seized to the cylinder walls. Take the spark plugs out and spray inside the cylinders with WD-40 or squirt some ...

Ad

I have a knocking sound coming from the front cylinder of my VS800 intruder, year 1994, with around 70,000 kl on the bike. what would be the best way to solve the problem?? would I have to consider re

Ad

Question about 2000 VS 800 Intruder

1 Answer

Have a 2000 Suzuki Intruder 800. Back cylinder Have a 2000 Suzuki Intruder 800. Back cylinder was running at high RPM. Took carb off, cleaned jets. Now, back cylinder does not run at idle, when you ...

Question about 1995 VS 800 Intruder

1 Answer

...It often sits for long periods of time, several weeks. Is this indicative of a leaking slave cylinder? How can I diagnose this? Hello, It sounds to me like you have air getting into the clutch ...

Question about 1995 VS 800 Intruder

1 Answer

THE FRONT CYLINDER ON MY SUZUKI INTRUDER IS BURNING RICH BUT THE REAR CYLINDER IS BURNING FINE do you have the correct spark plugs and are they gapped correctly?

Question about 1993 VS 800 Intruder

1 Answer

I have a 1993 vs800 intruder and had to replace the head gasket in the rear cylinder, but now when I put the motor back together the exhaust gets super hot and there is a knocking noise coming from ...

Question about 1993 VS 800 Intruder

1 Answer

why is my v-twin running on one cylinder? Ive cleaned the carbs already and it starts up and Ive let it run for at least 5 minutes on just the one cylinder. I feel that it is the front cylinder that ...

my bike is bogging down, drowning plugg in fuel, white smoke & strong smell of fuil from rear cylinder, what could be the problem? Sounds like the float is sticking in the carb on the rear ...

how many cylinders in the Suzuki Intruder vs800 1995 2 cylinders

Question about 1993 VS 800 Intruder

1 Answer

...cylinder quits Most likely a carb synchronaztion or improper throttle cable arrangement problem. This is a very complex procedure and should be performed by someone with experience in this task.I am ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...