Questions & Answers for: Rinnai clock read out

Error code "n" Rinnai RHFE-1004FA has an error reading of "n" that is constantly blinking. We have tried unplugging the heater and we get the same reading. It does not respond to any buttons. We are ...

rinnai unit I have my rinnai set at 70 and it is reading 74 degrees. If I set it at 68 it will read 78. There is still heat but there still is a problem with the temp. Please help. KS OK, sounds like ...

...Its done by the blue hex screw on the solenoid pump. The white one is for voltage. Turn hex screw clock wize to increse fuel and counter clock wize to decrese

...How do we get the stove restarted? Deedee Have you tried to disconnect the power and then reset the clock. If it doesn't fire after the first time push reset for a period of one second. If that ...

...56 The cleaning feature only cleans the igniter. This can happen automatically by just setting the clock. Clock button in Set position, set current time, button to Normal. The cleaning will happen

...fan has deposits on it. Run heater wide open for 1/2 hour to burn deposits away Make certain your clock is set. It seems a little silly, but the self-clean function will not work if the clock isn't ...

...means that it has 2 minutes left. It will automatically do this at 2:00 AM. If you don't have the clock set it will do it whenever it thinks it's 2:00

...have a cleaning cycle for the igniter. It usually does this at 2:00 am. If you don't have the clock set it will do it whenever it thinks it is 2:00 am. The cleaning cycle usually lasts about 10 ...

...is on and i cant figure out how to get the heater to work Under the Programming area ( where the Clock, Select & Time buttons are) there are 2 arrows. One pointing up and the other pointing ...

classroom. The heater is not used everyday. How do I turn the clock off. I want to set it to read --:-- Why If you want the clock to read --:-- , turn the power off for a while. 5 minutes should do it