Change date on camera - Kodak EasyShare Z710 Digital Camera

Replace the date battery as described on page 191 of the manual.

Hello! Welcome to FixYa!
You can change the date of your Samsung Digimax A503 Digital Camera. first of all turn your camera on. Now go to the menu by pressing "MENU" button. Now using right arrow key, Go to "Setup Menu". Now using down arrow key, select "Date". Here you can change the date that will be displayed on the captured images and set up the date type.
Here "Right arrow button" select the Year/Month/Day date type and "Left arrow button" is to move cursor to the Date Menu if the cursor is at the first item of the date and time setup.In all other cases cursor will be shifted to left of its current position and "Up and Down button" is to change the settings values. So you can change the date the according to desired format.
For clear picture the image of the menu where date menu is visible on the camera is given below


Don't hesitate to let me know if you want any further assistance.
I hope this solution helps you
Thank you and Keep using FixYa!

The date of your pictures is from the date you took it, So, it must be that last year, May 2010, when took those pictures, your camera's date was not set to 2010. You must also know that when a camera's battery is totally drained and stocked for a long time, the date will be reset. So next time make sure that your date is always right on your camera. =)

But here is a good news. You can just change the dates now after downloading it to your computer. Go to the picture you want to change the date, right click on it and choose properties. Click on details, then "date taken" and change it to any date you want.

I hope this helped you.

I understand that you wish to change the date on your KODAK camera.;
Please go into the menu, camera settings, date and time.

You can also reset the camera: Take the batteries out for longer than 10 sec. reinsert and the camera automatically asks you to set date and time.

your camera doesn't have internal battery so everytime you change the battery it will ask you to set the date...

I had the very same problem. Well as for the date changing you want to press the MENU button and press the right > arrow button which will then take you to SETUP and you will see DATE/TIME you then press ok (blue button) and you set the date and time whatever it may be.

And finally, to remove the date of of the pictures press MENU and then press the ^ (up) button and you'll see a choice called "DATE IMPRINT" and then press ok and choose the option OFF and the date will disappear.

There is an option in teh menu of the camera date imprint.Take it off.And thes is it!

It is really NORMAL that the date will be reset to the Manufacturer's date whenever you are changing batteries.

For you not to keep on changing the date and time of your camera, use Rechargeable batteries for a longer battery life span but make sure that you will be setting the battery type of your camera for the Rechargeable ones.

To set the correct battery type.
- Press on MENU button
- Press on the right button until you see SETUP 2
- Scroll down until you see BATTERY TYPE
- Select ALKALINE if you're using NON-RECHARGEABLE
- Select Ni-MH if you're using RECHARGEABLE
- Press on OK/MENU button for changes to be saved

Turn off camera after the settings
have been changed to refresh the camera.

this camera has an internal clock battery, which must keep the date or any other related information while you changing the batteries, the problem is, since you camera is pretty old, the clock battery is probably long dead, it can be changed, but it will require disassembling and resoldering