I AM looking for a free manual,for a Alpine CD Reciever-CDA 9886.

yes contact alpine 1st

http://support.alpine-usa.com/products/documents/OM_CDA-9886.PDF Give it a second takes a little time to load to your microsoft word.... this should be what you need

send your radio to alpine for waranty ''repair''

you need to reset the sirius alpine adapter, just remuve the positive (red) from battery terminal under the hood for 2 mins, or find the yellow power wire from the adaptor and disconec for 1 min.

the sterio hase to be more advanced then the ipod when was the softwer of the ipod made go to www.alpine-usa.com to verifi if the sterio is copatible with the ipod

It is really a preference. Try increasing, then decreasing each on the type of music you listen to and experiment untill it sounds good to you. It will also depend on the abilities of your speakers.

we are not a parts service, you need to call Alpine customer service, the number is in the user manual or on the net. Sorry, we just have no resources for parts location.

Hello maslynab,

The Alpine CDA-9886 is Bluetooth ready but requires an adapter such as Alpine's KCE-400BT or a generic adapter in order to pair with a phone.

Hope this helps.

You will require a BMW steering wheel interface module.

Made by PAC.

SEE IT HERE

Thanks for using FixYa!! A Very Helpful rating is appreciated for answering your FREE question.

Hold down the (F) button for several seconds. Release button and select (General) by turning volume knob and press (enter). Now select (Power IC) by turning volume knob and press (enter). Now turn knob and select (on) then press (enter). Hold (escape) button for several seconds.