How do you change the time from military to 12hr on onds-19 docking station

use the mode setting to change from 24 hr to 12hr

Would be best to have the TV make/model, but generally the clock settings will refer to clock "format", and you will find this using the remote.

Something like this.

http://cdnimg.thehonestreviews.com/ZoneShieldClockSC8000-image3.jpg

You need to change yours from 24hr. to 12hr.

HTH

Hold down the MODE button until the time starts flashing. Then use the buttons to cycle through the time, date, and so forth until you see 24hr. On that menu tap the buttons you use to change the setting to cycle it to 12hr.

www.apple.com/support

There could be a slider switch to go between 24hr and 12hr slide it accross. OR Hold down clock and see what that comes up with sometimes it can say AM/PM thats 12hr too.

I think I already answered this but according to reviews I've read of this docking station it stays in military time only...but one reviewer did say that when you sync your phone with it that i will change the time on the docking station to what's on your phone.

According to what I have read if you sync your phone with it, the docking station syncs with whatever time is on your phone...but mostly i read a bunch of reviews claiming that it only ever shows military time, but syncing the other device with it is worth a shot.

Go into clock settings, should be able to change it there.

You hold down the smallest protruding side-button, until the digits blink.
Use the other high protruding side-button to change to 12HR/24HR.
The 24HR mode is for military time.
Practice with the buttons, repeat as necessary.

There is a 'Clock' button omn the back of the alarm clock. Hold this down for 4 seconds until the display changes. You will then be able to change the 24hr/12hr display by clicking the skip fwd/back buttons. If you press the 'Clock' button again you canc cycle through changing the year, date and time in the same way.

Hope this helped :)